Totally obscure question about an SSL 4000

Recording Techniques, People Skills, Gear, Recording Spaces, Computers, and DIY

Moderators: drumsound, tomb

Post Reply
User avatar
MechaGodzilla
gettin' sounds
Posts: 105
Joined: Fri Oct 17, 2003 5:30 pm
Location: Seattle, WA

Totally obscure question about an SSL 4000

Post by MechaGodzilla » Fri Dec 02, 2005 4:52 pm

Heyo,
So I'm trying to move the floppy drive from our SSL 4000 from the power supply racks into the control room, about 10 feet away. I called SSL, and the interface is a 50-pin SASI connection - the precursor to SCSI-1 - but they didn't know how far the cable would go.
I looked up the specs for SCSI, and it says I could make up to an 18-foot cable run without problems, but I can't find anything on SASI. The connector is the same as a SCSI cable, though.
Any thoughts? We have to move a couch to get to the machine room every time we want to change disks; it sucks.

rydaken
pushin' record
Posts: 253
Joined: Tue Nov 01, 2005 10:47 pm
Location: Los Angeles

Post by rydaken » Fri Dec 02, 2005 7:01 pm

The studio I work for has all of the floppy drives for our G series in the control rooms, while the computers are in a closet about 10 feet away as well. We're running ribbon cable under the floor and through the wall. No problems with it here.

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 45 guests