Recording Techniques, People Skills, Gear, Recording Spaces, Computers, and DIY
Moderators: drumsound, tomb
-
inthedry
- audio school
- Posts: 3
- Joined: Sun Jan 15, 2006 7:21 pm
Post
by inthedry » Sun Jan 15, 2006 7:33 pm
ive just acquired logic express for my g4. i'm going analog mixer to m-audio mobilpre to mac. problem is i can't get a signal in in the express program despite recieving one in garageband. cant seem to find any input options. help?
-
thearnicasync
- buyin' gear
- Posts: 564
- Joined: Wed May 07, 2003 9:05 am
Post
by thearnicasync » Mon Jan 16, 2006 8:18 am
Hi there,
Make sure you've enabled the driver in the audio menu. Unless you run the assistant, it'll probably default to the computer's native i/o.
Good luck...
-
Dave Nutz
- pushin' record
- Posts: 274
- Joined: Sat Apr 17, 2004 5:00 am
- Location: NYC
Post
by Dave Nutz » Mon Jan 16, 2006 1:14 pm
also make sure that inputs exist in your environment page. (by default should be apple+8 )
01010100 01100001 01101011 01100101 00100000 01001101 01100101 00100000 01110100 01101111 00100000 01111001 01101111 01110101 01110010 00100000 01101100 01100101 01100001 01100100 01100101 01110010 00100001
-
inthedry
- audio school
- Posts: 3
- Joined: Sun Jan 15, 2006 7:21 pm
Post
by inthedry » Mon Jan 16, 2006 2:10 pm
thanks, i'll give those a try.
-
inthedry
- audio school
- Posts: 3
- Joined: Sun Jan 15, 2006 7:21 pm
Post
by inthedry » Tue Jan 17, 2006 6:10 pm
enabled the drivers. getting a signal, but not much of one no matter the level strength going in. didnt see anything about inputs on the environment page...
Who is online
Users browsing this forum: No registered users and 70 guests