Question about Ribbon mics
-
- alignin' 24-trk
- Posts: 68
- Joined: Fri Nov 18, 2005 6:40 am
Question about Ribbon mics
I'm thinking of getting a ribbon mic. What I am curious about is how much ambient noise they pick up in poor environments.
For example a condensor will pick up people talking out side and cars driving by, while a dynamic only really picks up the source immediately in front of it.... for the most part. Where does a ribbon fall between these two? (ignoring that fact that most Ribbons are figure 8.)
thanks
For example a condensor will pick up people talking out side and cars driving by, while a dynamic only really picks up the source immediately in front of it.... for the most part. Where does a ribbon fall between these two? (ignoring that fact that most Ribbons are figure 8.)
thanks
Most ribbons are les sensitive than other dynamic mics. Not all ribbons, mind you, but the ones I'm familiar with (Coles, old Shure models, some of the Beyers, Reslos...). I don't know how the recent and affordable Chinese offerings stack up in this regard...
I thought this club was for musicians. Who let the drummer in here??
-
- alignin' 24-trk
- Posts: 68
- Joined: Fri Nov 18, 2005 6:40 am
By less sensitive, I am assuming you mean that Ribbons will pick up even less ambient noise than other dynamics! Sounds like they could be great for use in less than ideal environments. (like my apartment)
Anybody know how the chinese (shinybox 46's especially) hold up to something like the AEA's in terms of sensitivity?
Anybody know how the chinese (shinybox 46's especially) hold up to something like the AEA's in terms of sensitivity?
i think it depends on what you are recording. if you are recording acoustic guitar or a quiet singer, you will have to add a lot of gain with the preamp since most ribbons have low output, which will inevitably bring up the noise of the room.
i like ribbons for a drum room mic or electric guitar but not as much for quiet stuff for this very reason. also keep in mind they are typically of a figure 8 pattern but not always.
i like ribbons for a drum room mic or electric guitar but not as much for quiet stuff for this very reason. also keep in mind they are typically of a figure 8 pattern but not always.
-
- pushin' record
- Posts: 266
- Joined: Mon May 12, 2003 6:36 pm
- Location: Headphones, OH
i've only been using my shinybox ribbons for a few months now (and they
are the only ribbon mics i have used extensivley) but i'm starting to understand
that they sound OK on some things close up (combo amps) but they sound
incredible on some things from farther away (drums, acoustic guitar).
so i've been using mine in conjunction with other mics. as far as ambient noise,
the shinybox mics (i have the 23L & the 46) are pretty quiet but have a
tendency to exagerate low rumble i.e. walking on a floor/carpet.
are the only ribbon mics i have used extensivley) but i'm starting to understand
that they sound OK on some things close up (combo amps) but they sound
incredible on some things from farther away (drums, acoustic guitar).
so i've been using mine in conjunction with other mics. as far as ambient noise,
the shinybox mics (i have the 23L & the 46) are pretty quiet but have a
tendency to exagerate low rumble i.e. walking on a floor/carpet.
-
- buyin' gear
- Posts: 564
- Joined: Wed May 07, 2003 9:05 am
I've been playing with the R84/R92 for a week, and I'm in love!
I think a ribbon would be perfect for less than ideal environments, because so much of the tone is going to be the mic itself. Also,
I find both of these mics to be a little noisy (with lots of gain, which they require), but it's a tradeoff I'm willing to accept.
It's interesting, I have a u195, a couple other condensers, and next to R84, they sound like a bag of potato chips. I think there are people buying fatsos that don't realize what they need is a ribbon
I've never found a better way to kill bad digital recording...so much fun, these ribbons!
kb
I think a ribbon would be perfect for less than ideal environments, because so much of the tone is going to be the mic itself. Also,
I find both of these mics to be a little noisy (with lots of gain, which they require), but it's a tradeoff I'm willing to accept.
It's interesting, I have a u195, a couple other condensers, and next to R84, they sound like a bag of potato chips. I think there are people buying fatsos that don't realize what they need is a ribbon
I've never found a better way to kill bad digital recording...so much fun, these ribbons!
kb
- inverseroom
- on a wing and a prayer
- Posts: 5031
- Joined: Wed May 07, 2003 8:37 am
- Location: Ithaca, NY
- Contact:
k
I love the sound of ribbons for vocals. My friend Scott at Ghost Town Recording up in Shelburne Falls, MA. has an incredible, huge live room and generally if we do a vocal with one of his ribbons, it requires ZERO processing afterwards. The figure 8 pattern picks up a wonderful natural slapback from the hard walls. It's an amazing sound.
I recommend having one, just to have the option. They're weird for some things, but it's a sound that can't be created with regular dynamics or condensers.
I recommend having one, just to have the option. They're weird for some things, but it's a sound that can't be created with regular dynamics or condensers.
I find adherence to fantasy troubling and unreasonable.
-
- alignin' 24-trk
- Posts: 68
- Joined: Fri Nov 18, 2005 6:40 am
Thanks guys, I'm thinking I may give one a shot.
Here is one more questioon: How will the ambient pick up compare to an SM7?
I have an AT4047, but my new apartment is poorly insulated (the 4047 picks up a lot of ambiant noise) and I can't use it for vocals or quiet sources. I'm hoping the ribbon will work for me, since it would be a little more versitale than something like an SM7.
Here is one more questioon: How will the ambient pick up compare to an SM7?
I have an AT4047, but my new apartment is poorly insulated (the 4047 picks up a lot of ambiant noise) and I can't use it for vocals or quiet sources. I'm hoping the ribbon will work for me, since it would be a little more versitale than something like an SM7.
Who is online
Users browsing this forum: No registered users and 318 guests