compressor for drum overheads?
-
- alignin' 24-trk
- Posts: 65
- Joined: Sat Jan 28, 2006 6:58 pm
- Contact:
compressor for drum overheads?
Hey just wondering what if any compressor you guys are usuing for drum overheads my set up is a pair akg 414's into a ADL600 which is awesome, though i dont have any good outboard compressors that are 2 channel, just wondering what some of you guys like to use for drums
doctors practice, musicians perform
- Russian Recording
- re-cappin' neve
- Posts: 752
- Joined: Wed May 21, 2003 2:28 pm
- Location: Bloomington, IN
- Contact:
-
- steve albini likes it
- Posts: 335
- Joined: Tue Sep 02, 2003 3:28 pm
- Location: Pittsburgh, PA
- Contact:
My absolute favorite (which I cannot afford, alas) is the Summit DCL-200. I miss that thing...
Second best (that I've experienced) would be the Waves RennComp. Mainly because that's the closest I've heard to the Summit DCL-200.
For aggressive stuff, I'm also partial to the LA2A model for the UAD-1 card.
MPEDrummer
Second best (that I've experienced) would be the Waves RennComp. Mainly because that's the closest I've heard to the Summit DCL-200.
For aggressive stuff, I'm also partial to the LA2A model for the UAD-1 card.
MPEDrummer
- Doublehelix
- takin' a dinner break
- Posts: 172
- Joined: Sat Apr 03, 2004 5:59 pm
- Location: USA
- Contact:
- dokushoka
- buyin' a studio
- Posts: 811
- Joined: Sat Feb 28, 2004 8:37 pm
- Location: San Francisco / L.A.
- Contact:
I generally find that the LOUDER you can get the snare in the overheads, the better. The single most important part of getting a convincing drum sound IS the overheads. When I compress them, generally, what I am listening for is getting the snare to release in a more "snappy" way while still keeping the decay of the cymbals sounding somewhat natural. Its really hard for me to explain this.Doublehelix wrote:I also never use a compressor on OHs... and if the snare is bleeding into the OHs to much, I would think that compression would just bring it out more.
I find that if I rely on the overheads to get the "body" of the snare and the toms, I end up in much better shape than if I rely on the close mics.
-
- gettin' sounds
- Posts: 141
- Joined: Mon Jul 14, 2003 12:05 am
- Location: northampton, Massachusetts
- Contact:
comp ohs
the only time i compress overheads is when the cymbals are just too out of hand. that has all to do with the drummer in my opinion. i've had a lot of luck with a tube tech LCA2B.
if i'm going for a 'compressed' sound then a good neve comp (don't know which number) will do. 1176s have been good as well.
in my little studio, i have an ashly cl-50 that surprisingly musical and smooth! for real! i love that thing. it's not the cleanest but it really does the job gracefully.
if i'm going for a 'compressed' sound then a good neve comp (don't know which number) will do. 1176s have been good as well.
in my little studio, i have an ashly cl-50 that surprisingly musical and smooth! for real! i love that thing. it's not the cleanest but it really does the job gracefully.
- Doublehelix
- takin' a dinner break
- Posts: 172
- Joined: Sat Apr 03, 2004 5:59 pm
- Location: USA
- Contact:
dokushoka wrote:I generally find that the LOUDER you can get the snare in the overheads, the better. The single most important part of getting a convincing drum sound IS the overheads. When I compress them, generally, what I am listening for is getting the snare to release in a more "snappy" way while still keeping the decay of the cymbals sounding somewhat natural. Its really hard for me to explain this.Doublehelix wrote:I also never use a compressor on OHs... and if the snare is bleeding into the OHs to much, I would think that compression would just bring it out more.
I find that if I rely on the overheads to get the "body" of the snare and the toms, I end up in much better shape than if I rely on the close mics.
I was refering to Russian Recording's comment in his post where he said:
"i very, very rarely compress overheads unless the damn snare is too loud, in which case I will use a BSS DPR402 or RNC in normal mode, with a fast attack and release to prevent it from blaring out and annoying the f out of me. Otherwise, I like 'em the way they are."
DH
"Nobody goes there anymore; it's too crowded."
-Yogi Berra
"Nobody goes there anymore; it's too crowded."
-Yogi Berra
-
- ghost haunting audio students
- Posts: 3307
- Joined: Wed May 07, 2003 2:11 pm
- Location: I have arrived... but where the hell am I?
I pretty much always compress drum overheads, but like everything for me, it tends to be light compression applied in mix-down - never on the way in. Usually for overheads it's the console compressors at work (Yamaha DM-2000 ) because they are very clean, effective, and they link together easier than routing through a stereo bus in ProTools. The typical settings will give a little squeeze to just slightly narrow the dynamic range and bring up the detail & presence, though I will squeeze a little harder if I'm dealing with a paricularly broad dynamic range. If I am using plug-ins within ProTools, I'll usually reach for the BF-1176 and lately I've been liking Digi's new "Maxim" limiter plug. But it's almost always just various settings on the board compressors.
-Jeremy
-Jeremy
- dokushoka
- buyin' a studio
- Posts: 811
- Joined: Sat Feb 28, 2004 8:37 pm
- Location: San Francisco / L.A.
- Contact:
I REALLY find that compressing the overheads with proper attack and release is pretty much the most important factor in getting a nice drum sound. The compression stabilizes the stereo image, brings up the snare and some nice ambience (if the room is decent), helps bring the brass in closer to the snare so you can turn UP the overheads and give the drums some shimmer and get the snare hammering away. Really great stuff. I find that if I don't compress overs, for most genres, including jazz (to an extent) the brass tends to get washy and the drums lack "focus" to me. I rarely go for an obviously compressed sound (except for some rock stuff) but more for a subtle "thickening." I sometimes am pulling down over 6db.
Who is online
Users browsing this forum: No registered users and 113 guests