Recommend a Boom Stand
Recommend a Boom Stand
For a heavy mic that won't empty my wallet. Thanks.
-
- audio school graduate
- Posts: 20
- Joined: Tue May 04, 2004 9:53 am
- Location: Cincinnati, OH
-
- zen recordist
- Posts: 8876
- Joined: Mon May 19, 2003 12:10 pm
- Location: NYC/Brooklyn
- Contact:
That wont empty your wallet...
That is relative. I LOVE the latch lake stand we have here. I have used it on every single session since we got it. The people are great, and it would last you a lifetime. I would rather buy one of those than have 10 different cheap stands fail on me over the years... And potentially drop a really expesive mic in the process.
I trust that the latch lake will keep my U47 off the floor!
That is relative. I LOVE the latch lake stand we have here. I have used it on every single session since we got it. The people are great, and it would last you a lifetime. I would rather buy one of those than have 10 different cheap stands fail on me over the years... And potentially drop a really expesive mic in the process.
I trust that the latch lake will keep my U47 off the floor!
- I'm Painting Again
- zen recordist
- Posts: 7086
- Joined: Wed May 07, 2003 2:15 am
- Location: New York, New York
- Contact:
WOW!! - That's an expensive stand - $750??joel hamilton wrote:That wont empty your wallet...
That is relative. I LOVE the latch lake stand we have here. I have used it on every single session since we got it. The people are great, and it would last you a lifetime. I would rather buy one of those than have 10 different cheap stands fail on me over the years... And potentially drop a really expesive mic in the process.
I trust that the latch lake will keep my U47 off the floor!
I agree it's worth it for a U47 but probably not for my collection of Rode and Studio Project mics (which all tolled probably don't add up to the cost of the stand).
-
- ghost haunting audio students
- Posts: 3307
- Joined: Wed May 07, 2003 2:11 pm
- Location: I have arrived... but where the hell am I?
I wouldn't go for that on-stage stand linked above because the bass is too small with all the weight centered on it and casters that are far too small. As soon as you place a some what heavy microphone or array out on the end of the boom and try to roll the base into position, you'll see why that design ain't so hot.
That's one of the points that Latchlake makes about their stand base - the weight is distributed around the edge of the stand so it has the most leverage to keep the pole upright.
But for a cheaper option, I like the QuikLok A-50 boom stand. It has its flaws, mostly in the single knob with the nylon tip that holds the boom arm in place at the top of the base - but that was only an issue for me when I tried to use one as a concert-height 14' stand, with heavy mic arrays, too often. Otherwise, they've been great for me, and they aren't too pricey, and the wheelbase is so wide that the stand is wonderfully stable.
-Jeremy
That's one of the points that Latchlake makes about their stand base - the weight is distributed around the edge of the stand so it has the most leverage to keep the pole upright.
But for a cheaper option, I like the QuikLok A-50 boom stand. It has its flaws, mostly in the single knob with the nylon tip that holds the boom arm in place at the top of the base - but that was only an issue for me when I tried to use one as a concert-height 14' stand, with heavy mic arrays, too often. Otherwise, they've been great for me, and they aren't too pricey, and the wheelbase is so wide that the stand is wonderfully stable.
-Jeremy
-
- studio intern
- Posts: 25
- Joined: Tue Feb 14, 2006 12:36 pm
- Location: Eagan, Minnesota
- Contact:
FYI: new kick a** stand from Latch Lake
Latch Lake will introduce a new more affordable stand at AES this October.
The stand will be true to the legacy of the micKing, but should be more affordable for project studio people.
The new stand will use the same "world's strongest boom clutch" as the micKing.
The new stand uses the same Latch Lake Lever Locks as the micKing for quick and sturdy adjustments. And I can do chin-ups on the boom just like the micKing.
The base will weigh 28 pounds, one pound lighter than the micKing.
The counterweight will weigh 7 pounds, same as micKing. Also removable and adjustable like micKing.
The main differences? Micking has 16" diameter base, new stand is 14" diameter. Micking has three section boom and mast, new stand has two section boom and mast. New stand still goes taller than Atlas.
MSRP will be $450. Street prices should give serious pause to anyone considering Atlas. Our primary cost savings are the smaller base diameter and the counterweight finish. Most of the parts are made in our factory. Assembled in Minnesota by U.S. citizens.
Anyone that values their time and microphone collection should check out our new stand.
The stand will be true to the legacy of the micKing, but should be more affordable for project studio people.
The new stand will use the same "world's strongest boom clutch" as the micKing.
The new stand uses the same Latch Lake Lever Locks as the micKing for quick and sturdy adjustments. And I can do chin-ups on the boom just like the micKing.
The base will weigh 28 pounds, one pound lighter than the micKing.
The counterweight will weigh 7 pounds, same as micKing. Also removable and adjustable like micKing.
The main differences? Micking has 16" diameter base, new stand is 14" diameter. Micking has three section boom and mast, new stand has two section boom and mast. New stand still goes taller than Atlas.
MSRP will be $450. Street prices should give serious pause to anyone considering Atlas. Our primary cost savings are the smaller base diameter and the counterweight finish. Most of the parts are made in our factory. Assembled in Minnesota by U.S. citizens.
Anyone that values their time and microphone collection should check out our new stand.
Jeff Roberts
Latch Lake Music
Eagan, MN
LatchLakeMusic.com
Latch Lake Music
Eagan, MN
LatchLakeMusic.com
Re: FYI: new kick a** stand from Latch Lake
sweet!Jeff Roberts wrote:Latch Lake will introduce a new more affordable stand at AES this October.
The stand will be true to the legacy of the micKing, but should be more affordable for project studio people.
The new stand will use the same "world's strongest boom clutch" as the micKing.
The new stand uses the same Latch Lake Lever Locks as the micKing for quick and sturdy adjustments. And I can do chin-ups on the boom just like the micKing.
The base will weigh 28 pounds, one pound lighter than the micKing.
The counterweight will weigh 7 pounds, same as micKing. Also removable and adjustable like micKing.
The main differences? Micking has 16" diameter base, new stand is 14" diameter. Micking has three section boom and mast, new stand has two section boom and mast. New stand still goes taller than Atlas.
MSRP will be $450. Street prices should give serious pause to anyone considering Atlas. Our primary cost savings are the smaller base diameter and the counterweight finish. Most of the parts are made in our factory. Assembled in Minnesota by U.S. citizens.
Anyone that values their time and microphone collection should check out our new stand.
-
- studio intern
- Posts: 25
- Joined: Tue Feb 14, 2006 12:36 pm
- Location: Eagan, Minnesota
- Contact:
Who is online
Users browsing this forum: No registered users and 31 guests