Flanger Question
- supersockmonkey
- gimme a little kick & snare
- Posts: 94
- Joined: Thu Oct 26, 2006 8:28 am
- Location: Costa Mesa, CA
- Contact:
Flanger Question
I was curious how they got such an effect, mainly 60's insane flange that seems to have a mind of its own. Notably The Byrds "Wasn?t Born To follow" and some of Hendrix's tunes. I think Lenny Kravitz used it at well. Was this a pedal/rack effect or tape manipulation of some sort?
*Ryan*
My Music: www.myspace.com/wearethepacific In crystal clear MP3 format
My Music: www.myspace.com/wearethepacific In crystal clear MP3 format
ah... real Tape Flanging. You are noticing the difference between real old school tape flanging and a Flanger effect, which tries to do the same thing, but up until recently, none of them could do the "real" thing due to not being able to go "through zero".
I have an explanation on one of my sites: Flanger article
Roger
I have an explanation on one of my sites: Flanger article
Roger
- supersockmonkey
- gimme a little kick & snare
- Posts: 94
- Joined: Thu Oct 26, 2006 8:28 am
- Location: Costa Mesa, CA
- Contact:
Nice. That?s what i thought (tape manipulation) but wasn?t quite sure. I really dig that article and will definitely borrow some of those techniques. Is it possible to recreate the tape flange in say Protools doubling up the tracks and slowing one down slightly? I?ve only been using Protools for a year now so im not sure of all its abilities.
*Ryan*
My Music: www.myspace.com/wearethepacific In crystal clear MP3 format
My Music: www.myspace.com/wearethepacific In crystal clear MP3 format
Here is my special secret recipe for DAW-based Tape Flange effects! Remember, you heard it from me first and I'm sure no one has ever done this before
Take the track you want to flange. If it's the whole mix or a submix of, say the drums, you print it to it's own track, if it isn't already. (Important: you need it to be a recorded track, if it's a submix) Then make a copy of that track.
You will now have two of the same tracks adjacent to each other. (hint: if you invert the phase on one of these tracks, it should totally cancel) Now insert a delay plug in to one of the tracks. Set the delay for 2ms, NO feedback, NO modulation and 100% wet. Now take the actual track and move it AHEAD in time by 2ms. It should now be approximately in time with the non-delayed track.
Now apply a slow and medium depth modulation to the delay and you should start to hear the makings of a realistic tape flange effect. What is happening is that since the track with the delay is shifted ahead in time, it can technically occur BEFORE the unprocessed track by a millesecond or two. Then when the delay modulates to OVER 2ms, it shifts AFTER the original. Instant WHOOOOSH. Experiment and you'll find what makes it work best for your mix.
A key here is that the undelayed and delayed tracks should not be panned any differently. When you first try it, do it in mono. This is kinda crucial. If it's a stereo track, like a whole mix, make sure the delay plug in is doing the same thing on the right and left.
Then, once you've mastered this effect, then pan it out in stereo, unprocessed track on one side, and delayed on the other side and you won't hear the flange so much, but you will hear a cool stereo effect that pans around your head, but is always in both speakers.
Roger
Take the track you want to flange. If it's the whole mix or a submix of, say the drums, you print it to it's own track, if it isn't already. (Important: you need it to be a recorded track, if it's a submix) Then make a copy of that track.
You will now have two of the same tracks adjacent to each other. (hint: if you invert the phase on one of these tracks, it should totally cancel) Now insert a delay plug in to one of the tracks. Set the delay for 2ms, NO feedback, NO modulation and 100% wet. Now take the actual track and move it AHEAD in time by 2ms. It should now be approximately in time with the non-delayed track.
Now apply a slow and medium depth modulation to the delay and you should start to hear the makings of a realistic tape flange effect. What is happening is that since the track with the delay is shifted ahead in time, it can technically occur BEFORE the unprocessed track by a millesecond or two. Then when the delay modulates to OVER 2ms, it shifts AFTER the original. Instant WHOOOOSH. Experiment and you'll find what makes it work best for your mix.
A key here is that the undelayed and delayed tracks should not be panned any differently. When you first try it, do it in mono. This is kinda crucial. If it's a stereo track, like a whole mix, make sure the delay plug in is doing the same thing on the right and left.
Then, once you've mastered this effect, then pan it out in stereo, unprocessed track on one side, and delayed on the other side and you won't hear the flange so much, but you will hear a cool stereo effect that pans around your head, but is always in both speakers.
Roger
Why don't they have a plugin that comes even slightly close?
I was listening to the Dukes of stratosphere record the other day and the tape flange on that is just amazing. I was wishing I had a plug that really delivered the goods.
I'm going to try the Rodgre trick though.
Sounds like a great idea.
I was listening to the Dukes of stratosphere record the other day and the tape flange on that is just amazing. I was wishing I had a plug that really delivered the goods.
I'm going to try the Rodgre trick though.
Sounds like a great idea.
Last edited by Slider on Tue Dec 19, 2006 9:06 pm, edited 1 time in total.
They do.Slider wrote:Why don't they have a plugin that comes even slightly close?
I was listening to the Dukes of stratosphere record the other day and the tape flange on that is just amazing. I was wishing I had a plug that really delivered the goods.
I'm going to try the Rogre trick though.
Sounds like a great idea.
Some plug-in flangers do thru-zero flanging. At this point, They probably all do. I can get an okay tape flange effect just with a stereo delay inserted on a track in PT. The process I described above is a great way to learn what's actually going on, though.
And if you want to talk hardware, my favorite box to do tape flange effects at the moment is the $150 Alesis Airfx. It does great tape flange with the wave of your hand for randomness.
That's a key thing that I forgot to mention. Great tape flanging shouldn't necessarily sweep back and forth with a steady cycle like a typical flanger LFO. The beauty of tape flanging is that it comes and it goes at certain parts. Once you understand the mechanics behind it, you can figure out ways to bring it in where you need it and also how to accent the right spots of the song. It sucks when the big swoosh isn't at the big dramatic part!
Roger
think i could get that semi-randomness going with the 2ms button, some feedback and the envelope-following function on my DeltaLab ADM2048?Rodgre wrote:That's a key thing that I forgot to mention. Great tape flanging shouldn't necessarily sweep back and forth with a steady cycle like a typical flanger LFO. The beauty of tape flanging is that it comes and it goes at certain parts. Once you understand the mechanics behind it, you can figure out ways to bring it in where you need it and also how to accent the right spots of the song. It sucks when the big swoosh isn't at the big dramatic part!
Roger
?What need is there to weep over parts of life? The whole of it calls for tears.? -- Seneca
That's weird because I have a few flanger plugins that are thru-zero and they just don't do what tape flanging does. The effect is just not as strong.Rodgre wrote:They do.Slider wrote:Why don't they have a plugin that comes even slightly close?
I was listening to the Dukes of stratosphere record the other day and the tape flange on that is just amazing. I was wishing I had a plug that really delivered the goods.
I'm going to try the Rogre trick though.
Sounds like a great idea.
Some plug-in flangers do thru-zero flanging. At this point, They probably all do. I can get an okay tape flange effect just with a stereo delay inserted on a track in PT. The process I described above is a great way to learn what's actually going on, though.
And if you want to talk hardware, my favorite box to do tape flange effects at the moment is the $150 Alesis Airfx. It does great tape flange with the wave of your hand for randomness.
That's a key thing that I forgot to mention. Great tape flanging shouldn't necessarily sweep back and forth with a steady cycle like a typical flanger LFO. The beauty of tape flanging is that it comes and it goes at certain parts. Once you understand the mechanics behind it, you can figure out ways to bring it in where you need it and also how to accent the right spots of the song. It sucks when the big swoosh isn't at the big dramatic part!
Roger
Not that I need to do this effect very often, but it would be nice to have something that sounded close. Maybe I should try something other than the Waves meta-flanger next time.
-
- zen recordist
- Posts: 8876
- Joined: Mon May 19, 2003 12:10 pm
- Location: NYC/Brooklyn
- Contact:
If you have waves stuff, you can do the same thing rodgre describes but with the mondomod plugin for modulation... and since you can offset the phase of the FM and the AM, you can get semi random fun happening just by duplicating a track, and throwing a mondomod on one of the tracks, with ADC engaged (in HD).
I also like just leaving chunks of audio laying around at exact or close to the same time stamp as the original, and again, modulate slightly, and see where the phase relationship "lands" in any given moment. Automate with the pencil tool on the sample and hold setting and you can get some amazing random phase/ flange type effects going on backing vocals or something like that... I love it on B voc's because you can do this in stereo and really mess with phase relationshiips that "decentralize" the BGV's as the track progresses, then it returns with a center image, then sort of "whooshes" out to the sides again.... totally fun.
I also like just leaving chunks of audio laying around at exact or close to the same time stamp as the original, and again, modulate slightly, and see where the phase relationship "lands" in any given moment. Automate with the pencil tool on the sample and hold setting and you can get some amazing random phase/ flange type effects going on backing vocals or something like that... I love it on B voc's because you can do this in stereo and really mess with phase relationshiips that "decentralize" the BGV's as the track progresses, then it returns with a center image, then sort of "whooshes" out to the sides again.... totally fun.
- Bill @ Irie Lab
- suffering 'studio suck'
- Posts: 401
- Joined: Wed Dec 03, 2003 10:53 am
- Location: Boston, USA
- Contact:
- supersockmonkey
- gimme a little kick & snare
- Posts: 94
- Joined: Thu Oct 26, 2006 8:28 am
- Location: Costa Mesa, CA
- Contact:
Thanks all. Now I have to build on my flanging chops with my new found knowledge. This should be interesting. Thanks again.
*Ryan*
My Music: www.myspace.com/wearethepacific In crystal clear MP3 format
My Music: www.myspace.com/wearethepacific In crystal clear MP3 format
RefD wrote:think i could get that semi-randomness going with the 2ms button, some feedback and the envelope-following function on my DeltaLab ADM2048?Rodgre wrote:That's a key thing that I forgot to mention. Great tape flanging shouldn't necessarily sweep back and forth with a steady cycle like a typical flanger LFO. The beauty of tape flanging is that it comes and it goes at certain parts. Once you understand the mechanics behind it, you can figure out ways to bring it in where you need it and also how to accent the right spots of the song. It sucks when the big swoosh isn't at the big dramatic part!
Roger
?What need is there to weep over parts of life? The whole of it calls for tears.? -- Seneca
Who is online
Users browsing this forum: Google [Bot] and 105 guests