Well, Mr DIY is at it again.
I designed and built some OC-703 acoustic panel wall mounts for less than $10 each using (oak-faced) 1/2 inch plywood, a 2"X4", some screws, 2 hanging brackets, 4 felt adhesive pads and 4 angle braces.
It brings the (self-covered) 2" OC-703 Acoustic Panel 4-1/2 inches away from the wall with a bare minimum of the panel being blocked, front or back.
It's not Rocket Science but it seems to work.
Here is link to step by step photos:
http://mysite.verizon.net/resqg90a/id31.html
ADDITION: I bought my "naked" OC703 panels at ATS Acoustics. They liked this well enough to place photos of this on their business site at:
http://www.atsacoustics.com/item--Bob-G ... llery.html
$10 DIY Wall Mount for Owens-Corning 703 Acoustic Panels
-
- gettin' sounds
- Posts: 146
- Joined: Thu Feb 23, 2006 6:18 pm
- Location: Central USA
- Contact:
$10 DIY Wall Mount for Owens-Corning 703 Acoustic Panels
Last edited by bobg (homestudioguy) on Sat May 05, 2007 5:05 am, edited 1 time in total.
-
- gettin' sounds
- Posts: 146
- Joined: Thu Feb 23, 2006 6:18 pm
- Location: Central USA
- Contact:
Who is online
Users browsing this forum: Theo_Karon and 137 guests