Latest gear you've acquired.....

shedshrine · Post by **shedshrine** » Sat May 31, 2014 7:17 pm

rhythm ranch wrote:Excellent!

+1 RadioMacKinnonhead, Boards of MacKinnon...

Then you get a nice edgy Brubeck meets Pulp Fiction vibed "The Past is a Foreign Country". Great stuff!

A.David.MacKinnon · Post by **A.David.MacKinnon** » Sun Jun 01, 2014 4:30 am

Thanks!
I get bored easily.

Mark · Post by **Mark** » Thu Jun 05, 2014 3:25 pm

ARTcessories Phantom III for ?5 from a pawn shop.

PSU was missing, but they're easy enough to find.

Also the Behringer Microamp (HA400) for ?8

Mark · Post by **Mark** » Thu Jun 05, 2014 3:26 pm

ARTcessories Phantom III for ?5 from a pawn shop.

PSU was missing, but they're easy enough to find.

Also the Behringer Microamp (HA400) for ?8

vvv · Post by **vvv** » Fri Jun 06, 2014 12:52 pm

I apparently have a tube mic jones.

I mean, I realized it before but I just yesterday rec'd a CAD Trion 800 and a CAD M9. The only justification I have is, I spent less than US$270 for 'em, combined.

ott0bot · Post by **ott0bot** » Fri Jun 13, 2014 6:38 am

I picked up a mid 80's rack mount Chandler Tube Driver. It has the original tube, and it's still kicking away without excess noise. It's awesome beyond words. I used it for a cello part the other day and it was killer. You can adjust the bias to make things really resonant or subdue it. Super nice to have a line input overdrive, instead of having to re-amp. great tool.

http://instagram.com/p/opH8jfFNTy/

Jeff White · Post by **Jeff White** » Fri Jun 13, 2014 12:07 pm

ott0bot wrote:I picked up a mid 80's rack mount Chandler Tube Driver. It has the original tube, and it's still kicking away without excess noise. It's awesome beyond words. I used it for a cello part the other day and it was killer. You can adjust the bias to make things really resonant or subdue it. Super nice to have a line input overdrive, instead of having to re-amp. great tool.

http://instagram.com/p/opH8jfFNTy/

I'm really interested in picking one of these up. Are you using it directly after mic preamp, or on an aux on a board while mixing?

Jeff

vvv · Post by **vvv** » Fri Jun 13, 2014 2:32 pm

My third One-Spot, this one for just in the bedio - the other two on are my bass and guitar FX boards.

Just a super-convenient, well-designed power source, quiet enuff for me.

ott0bot · Post by **ott0bot** » Sun Jun 15, 2014 11:27 pm

Jeff White wrote:
ott0bot wrote:I picked up a mid 80's rack mount Chandler Tube Driver. It has the original tube, and it's still kicking away without excess noise. It's awesome beyond words. I used it for a cello part the other day and it was killer. You can adjust the bias to make things really resonant or subdue it. Super nice to have a line input overdrive, instead of having to re-amp. great tool.

http://instagram.com/p/opH8jfFNTy/
I'm really interested in picking one of these up. Are you using it directly after mic preamp, or on an aux on a board while mixing?

Jeff

both...sorta. mostly via a line out of my interface thru the patchbay and back in...and just print it to a new track or during mix down. no board here....yet.

alexdingley · Post by **alexdingley** » Tue Jun 17, 2014 7:41 pm

Finally picked up my first real synth? My Dave Smith Instruments Prophet 12 arrived yesterday. It's a monster. that's all i've got time to write? so much synthing to do.

pandemic · Post by **pandemic** » Wed Jun 25, 2014 6:57 am

soooooo....I've had a big couple of weeks. I drove to Tennessee and bought a DBX 165a, a Bozak CMA 10-1 mixer loeaded with mic pre cards and input transformers and a Ross Mega Amp 200 power amp...all for 460 plus gas.

Then yesterday I stopped by the local Goodwill and found a pair of Dynaco A25's which went home with me and sound AWESOME!

I also bought a Yamaha M206 6 channel mixer to see if there is any magic inside. There is not but I still may mod it for direct outs...after I get the Bozak rebuilt.

And I bought some Superlux headphones.

Gregg Juke · Post by **Gregg Juke** » Wed Jun 25, 2014 8:48 am

An analog delay courtesy of the TOMB; waiting on a couple of Tascam patchbays (TOMB) and a Crown XL2000 amp for subs live (GC)... Also, a mess of cool lighting gear for live use...

GJ

vvv · Post by **vvv** » Wed Jun 25, 2014 10:12 am

Martin D1, used offa the Ebog - I'm hopeful it'll be a good one.

magritte · Post by **magritte** » Wed Jun 25, 2014 11:02 pm

ribbon mic. nohype audio lrm-1.
these are a really good deal, imo

Acsii · Post by **Acsii** » Fri Jun 27, 2014 6:48 am

A strange ?" full track reel to reel. which I am yet to get tape for...

Message Board

Latest gear you've acquired.....

new toys

Who is online