Latest gear you've acquired.....
- digitaldrummer
- cryogenically thawing
- Posts: 3528
- Joined: Wed Nov 23, 2005 9:51 pm
- Location: Austin, Texas
- Contact:
Re: Latest gear you've acquired.....
just pulled the trigger on a Chandler Limited TG Type L microphone. Looks very interesting even though it's a FET mic (will be a few days before I get it but I'll report back).
- alexdingley
- buyin' a studio
- Posts: 806
- Joined: Fri Feb 13, 2004 10:00 am
- Location: Greater Philadelphia Area
- Contact:
Re: Latest gear you've acquired.....
My friends and I play a rag-tag live show every year or so... and we got tired of ganging-together 2 small mixers with a powered pa-head/mixer, so I went ahead and bought a used Mackie Onyx 1640 mixer... and damn! this is maybe the quietest mixer I've ever used. And the flexibility of the aux routing + the ability to fully disengage the EQ is really nice. Also, the direct outs on 2 d-subs is solid.
- A.David.MacKinnon
- ears didn't survive the freeze
- Posts: 3823
- Joined: Wed May 07, 2003 5:57 am
- Location: Toronto
- Contact:
Re: Latest gear you've acquired.....
One of my clients has the old FireWire enabled version. I agree with all of your points. I've used theirs a bunch for demos, live shows/recording and other odds and ends. Huge bang for the buck and super cheap used.alexdingley wrote: ↑Sat Nov 25, 2023 5:04 amMy friends and I play a rag-tag live show every year or so... and we got tired of ganging-together 2 small mixers with a powered pa-head/mixer, so I went ahead and bought a used Mackie Onyx 1640 mixer... and damn! this is maybe the quietest mixer I've ever used. And the flexibility of the aux routing + the ability to fully disengage the EQ is really nice. Also, the direct outs on 2 d-subs is solid.
- Scodiddly
- genitals didn't survive the freeze
- Posts: 3986
- Joined: Wed Dec 10, 2003 6:38 am
- Location: Mundelein, IL, USA
- Contact:
Re: Latest gear you've acquired.....
The Onyx series really was underrated - we've had people* request them for live recording, just using the inputs to feet those DSub outputs.
Parts are getting maybe a little hard to find, they used these weird SIP (single inline package) op-amps in a few spots and those occasionally burn out.
*real professional people, no less.
Parts are getting maybe a little hard to find, they used these weird SIP (single inline package) op-amps in a few spots and those occasionally burn out.
*real professional people, no less.
Re: Latest gear you've acquired.....
Mackie 4 channel cans mixer
cheap Tascam cans
Klark-Technic LA-2 thingie
and I gotta new guitar amp coming
cheap Tascam cans
Klark-Technic LA-2 thingie
and I gotta new guitar amp coming
- losthighway
- resurrected
- Posts: 2351
- Joined: Mon Apr 14, 2008 8:02 pm
- Contact:
Re: Latest gear you've acquired.....
You should share your impressions after putting it through its paces.
Re: Latest gear you've acquired.....
I shall - I used it yesterday on one track with a dynamic (SE V7) after a Eureka - sounded good but that was just one lead vocal and a cuppla BV's.
I just did a instinctive setting, and it sounded great, but I need to "put it thru its paces".
I just did a instinctive setting, and it sounded great, but I need to "put it thru its paces".
Re: Latest gear you've acquired.....
CMC Superfuzz - so this guy makes clones with mods, sells on the R-verb. This one gives the choice of GE or SI - sounds great, as does the mids-adjustable Green Russian Muff I bought a few weeks ago,
Fuzzrocious Cat Tail: this is a modded Rat clone, and this one has extra EQ, distortion and a boost. It's got all the good Rat stuff, without the fizz.
Fender Bassbreaker 15: I so love my 007, I wanted a louder one to use at jams. Got a good price - these are relatively expensive (couldn't justify the 18/35 or the 40w., both going over US$1k). It does a good basic Fender clean, but not quite as nice on top as my HRDX or ProJr. But from crunch on up, it's pretty amazing. Has digi-verb what is OK, but 3 gain voicings that are exceptionally cool, lotsa gain and EQ control. And a treble-booster button.
Fuzzrocious Cat Tail: this is a modded Rat clone, and this one has extra EQ, distortion and a boost. It's got all the good Rat stuff, without the fizz.
Fender Bassbreaker 15: I so love my 007, I wanted a louder one to use at jams. Got a good price - these are relatively expensive (couldn't justify the 18/35 or the 40w., both going over US$1k). It does a good basic Fender clean, but not quite as nice on top as my HRDX or ProJr. But from crunch on up, it's pretty amazing. Has digi-verb what is OK, but 3 gain voicings that are exceptionally cool, lotsa gain and EQ control. And a treble-booster button.
- Attachments
-
- CMCSuperfuzz-FuzzrociousCattail-Bassbrkr15 sm.jpg (96.1 KiB) Viewed 12065 times
-
- gimme a little kick & snare
- Posts: 97
- Joined: Sat Oct 01, 2011 10:50 am
- Location: Mason City Iowa
Re: Latest gear you've acquired.....
Peavey Tube Sweetener. Didn't know what to expect. Some think it's great, some say it really sucks. The one I got last week looks like new old stock. Perfect, like new condition. Built like a tank. Massive power supply providing over 300 volts for the tubes. I put in two NOS Webcor 12AX7s (US made tube from the 60s) and a Military grade Mullard 12AT7. Sounds really good to my ears. It has a low pass filter on each channel that I've read a lot of hate about on line. I think it sounds very good. Just a little of the highs shaved off and it sounds pretty tape like. Was considering a Sonic Farm Creamer or one of their other pieces but with the Peavey, I'm good.
RobCoates
- digitaldrummer
- cryogenically thawing
- Posts: 3528
- Joined: Wed Nov 23, 2005 9:51 pm
- Location: Austin, Texas
- Contact:
Re: Latest gear you've acquired.....
I've got a Pearlman TM-1 on the way that should arrive tomorrow. Now I'll have a few "better" mics to choose from when recording vocals (no no, not mine... somebody else). looking forward to that.
btw, I used the Type L on a singer/songwriter and it sounded great on vocals (and a little harmonica). Good rejection of the acoustic guitar (used 414's for that). anyway, it's a keeper (for awhile at least).
btw, I used the Type L on a singer/songwriter and it sounded great on vocals (and a little harmonica). Good rejection of the acoustic guitar (used 414's for that). anyway, it's a keeper (for awhile at least).
- digitaldrummer
- cryogenically thawing
- Posts: 3528
- Joined: Wed Nov 23, 2005 9:51 pm
- Location: Austin, Texas
- Contact:
Re: Latest gear you've acquired.....
oh man, the Pearlman TM-1 is nice. I only did a quick vocal check (and it's got color - which is what I wanted). Then I used it (in Omni) as a room mic for a pedal steel session and it is sounding really nice. I've used other mics for room duty but this just really seemed to grab the room. Looking forward to using it a lot more. This one has an EF80 (6BX6) tube and the gray paint job fwiw.
- trodden
- on a wing and a prayer
- Posts: 5710
- Joined: Wed May 07, 2003 8:21 am
- Location: C-attle
- Contact:
Re: Latest gear you've acquired.....
Those have always been desirable. Any idea what the difference in sound is between the EF80 and the JAN 6CB6? Does the EF80 cost more? I don't really have any "better" mics for vocals. It's either the SM7b, CAD e300, GrooveTubes MD1a, WARM WA-12, or Shure Beta 58! And I've had all those (except the WARM) for over 15 years. Occasionally I'll us the AT4047 on vox.digitaldrummer wrote: ↑Sat Dec 02, 2023 7:14 amoh man, the Pearlman TM-1 is nice. I only did a quick vocal check (and it's got color - which is what I wanted). Then I used it (in Omni) as a room mic for a pedal steel session and it is sounding really nice. I've used other mics for room duty but this just really seemed to grab the room. Looking forward to using it a lot more. This one has an EF80 (6BX6) tube and the gray paint job fwiw.
- trodden
- on a wing and a prayer
- Posts: 5710
- Joined: Wed May 07, 2003 8:21 am
- Location: C-attle
- Contact:
Re: Latest gear you've acquired.....
What's the word on this one? Checking it out, affordable, and the two voicings, seems pretty awesome! Another contender along with the UT Fet47 i've had my eyes on.digitaldrummer wrote: ↑Tue Nov 21, 2023 11:33 amjust pulled the trigger on a Chandler Limited TG Type L microphone. Looks very interesting even though it's a FET mic (will be a few days before I get it but I'll report back).
btw, I used the Type L on a singer/songwriter and it sounded great on vocals (and a little harmonica). Good rejection of the acoustic guitar (used 414's for that). anyway, it's a keeper (for awhile at least).
Ahh, just now saw this. Keep us updated on this mic please!
- digitaldrummer
- cryogenically thawing
- Posts: 3528
- Joined: Wed Nov 23, 2005 9:51 pm
- Location: Austin, Texas
- Contact:
Re: Latest gear you've acquired.....
I just used it for 2 pedal steel sessions yesterday (same player but for 2 projects) and it was on the amp. I used the "B" setting this time and it went into an A-Designs EM-Gold 500 preamp. It was really nice and pretty smooth (and I usually like a ribbon but this worked well). I rolled off a little low-end (but I do that to most guitars too). the TM-1 was doing room for this same session. The Chandler is new so I'm throwing it in front of a lot of different things to get a feel for what it can do. so far have not been disappointed. It seems a little pricey (for how small it is!) but the 2 settings are useful and it sounds great.
- Scodiddly
- genitals didn't survive the freeze
- Posts: 3986
- Joined: Wed Dec 10, 2003 6:38 am
- Location: Mundelein, IL, USA
- Contact:
Re: Latest gear you've acquired.....
Almost bought this at a thrift store today - an official Blue Man Group fun keyboard.
Ended up just buying some faux-woodgrain bookends, because that's what I actually need.
Ended up just buying some faux-woodgrain bookends, because that's what I actually need.
Who is online
Users browsing this forum: No registered users and 152 guests