yamaha PM1000 "INPUT" transformer wiring help (INP

[jaredrush]

I'm using the turm transformers to balance an old vintage rauland pultec type eq. I know the wiring for the output transformers, but what is the wiring for the INPUT trannys?

any help would be great.


thanks

[idylldon]

From Scodiddly on the Prodigy DIY forum, which is how I remember mine being wired:

Yellow + out (this is where you'd put a DI jack)
White - out (grounded)
Brown input center tap (for phantom power)
Blue input I1
Green input I2

I1 and I2 are the balanced inputs - not sure about polarity, those are just the labels on the circuit board.

Here's the link to an informative thread:

http://www.prodigy-pro.com/forum/viewto ... 1000+input

Cheers,
--
Don