Stage rack mount setup?
-
- alignin' 24-trk
- Posts: 52
- Joined: Fri Jul 14, 2006 10:51 pm
- Location: South chicago
- Contact:
Stage rack mount setup?
I need a rack for my drum set up. I have a VS 1680 Roland that I use as a mixer, an MPC 2000 a roland TD8 Brain a power conditioner a power amp, zip drive, cd rom drive and a couple more rack pieces. I need the 1680, MPC and TD8 to slide out so I can easily access them and program on them and what not. I would essentially like to have drawers that slide out to me so I can work with the MPC and the TD8. Does anyone else use this type of set up or even know what I'm trying to get at? Know of any custom rack/case companies I need to checkout that are not super expensive?
If it's all Racksized (don't know, never worked with these units), you could just get a mixer rack and put the 1680 on top, then get a couple rolling shelves for the others. I don't know what your definition of not super expensive, but just looking at sweetwater there's this:
http://www.sweetwater.com/store/detail/GigRig1406/
with two of these:
http://www.sweetwater.com/store/detail/SKBVS1/
and that would probably do what you want.
http://www.sweetwater.com/store/detail/GigRig1406/
with two of these:
http://www.sweetwater.com/store/detail/SKBVS1/
and that would probably do what you want.
"It's not a recording studio without a lava lamp"
~Mark Rubel
"Don't meddle in the affairs of a patent dragon, for thou art tasty and good with ketchup." ~ohcrapitssteve
~Mark Rubel
"Don't meddle in the affairs of a patent dragon, for thou art tasty and good with ketchup." ~ohcrapitssteve
-
- alignin' 24-trk
- Posts: 52
- Joined: Fri Jul 14, 2006 10:51 pm
- Location: South chicago
- Contact:
Thanks! http://www.sweetwater.com/store/detail/SKBVS1/
That's more along the lines of what I'm talking about. The pieces are not rack mount pieces but I plan on mounting them to the drawers in someway. So they are not moving around while transporting them.
That's more along the lines of what I'm talking about. The pieces are not rack mount pieces but I plan on mounting them to the drawers in someway. So they are not moving around while transporting them.
Who is online
Users browsing this forum: No registered users and 28 guests