not sure what's going on here. I've just been working with my first outboard mixer - a hill remix and I got some sort of weird surge. I'm hoping it's just a fuse but I'm scared that something worse may have happened. I pulled the fuse on the power source and it's not burnt through like a lower voltage fuse would be but it looks like there is some change in the middle. I'm getting no power on the power amp at all from the wall. I'm looking for any hints or next steps that anyone might have.
thanks for the help.
My Mixer Just Blew Up
-
- steve albini likes it
- Posts: 300
- Joined: Thu Jan 29, 2004 11:01 pm
- Location: The Ice cream truck in my neighborhood plays Helter-Skelter
Best bet is to follow the current and start working downstream to eliminate the item.
1) Check the power at the wall socket to ensure a circuit breaker hasn't tripped.
2) Check the power out on the power supply to ensure the proper voltage is being supplied out.
3) Ohm out the fuse to check for continuity.
4) Continue onto the following line items.
1) Check the power at the wall socket to ensure a circuit breaker hasn't tripped.
2) Check the power out on the power supply to ensure the proper voltage is being supplied out.
3) Ohm out the fuse to check for continuity.
4) Continue onto the following line items.
What do YOU create?
-
- george martin
- Posts: 1347
- Joined: Mon Nov 13, 2006 8:47 pm
- Location: home on the range
Who is online
Users browsing this forum: No registered users and 343 guests