Hi,
Anyone have any idea who out there repairs lomo's (19a19)? I am also looking for
another cable for this mic as the problem may be the cable and not the mic. Any ideas where I could find a replacement cable.
Many Thanks,
d
Lomo repair and parts
- Russian Recording
- re-cappin' neve
- Posts: 752
- Joined: Wed May 21, 2003 2:28 pm
- Location: Bloomington, IN
- Contact:
hey, if it's just the cable and not the connector, you can just get standard 6 conductor tube mic cable. i get mine from redco. the connectors on those are pretty shifty though. if those have gon bad, it might tough to replace, but it also just might be a cold solder joint, especially of the cables are original.
as far as repair, i've sent my lomos out to chipman verspyk and matthew marinelli. both did a great god job, but chip was much more responsive and took about 1/8th the time to get my mic back to me. pm if you want contact info for either of them
mike
as far as repair, i've sent my lomos out to chipman verspyk and matthew marinelli. both did a great god job, but chip was much more responsive and took about 1/8th the time to get my mic back to me. pm if you want contact info for either of them
mike
Who is online
Users browsing this forum: No registered users and 140 guests