http://img171.imageshack.us/my.php?imag ... psubu5.jpg
The one on the right, the circular 8 pin.
It's for a Trident 65 PSU cable
What kind of connector is this?
What kind of connector is this?
Stilgar, we've got wormsign the likes of which God has never seen!
- NeglectedFred
- pushin' record
- Posts: 248
- Joined: Tue Jan 18, 2005 6:53 pm
- Location: Salt Lake City
This probably wont help, but if it gets you in the right direction then it's not a complete waste of time.
Scroll about 1/3 of the way down.
http://www.nu9n.com/tx.html
But probably not... There's probably no standard to any ol' 8 pin config, so sorry to bother..
Scroll about 1/3 of the way down.
http://www.nu9n.com/tx.html
But probably not... There's probably no standard to any ol' 8 pin config, so sorry to bother..
I eat glue.
- winky dinglehoffer
- buyin' a studio
- Posts: 813
- Joined: Wed May 07, 2003 12:08 pm
- Location: ATL
-
- re-cappin' neve
- Posts: 699
- Joined: Thu Feb 09, 2006 5:00 pm
- Location: Allentown, PA
- Contact:
Not sure if this helps, but I found the following at Mouser's website:
http://www.amphenol-industrial.com/new/ ... DS-195.pdf
also:
http://www.bulgin.co.uk/PDFs/CatNo82/Bu ... es2005.pdf
http://www.amphenol-industrial.com/new/ ... DS-195.pdf
also:
http://www.bulgin.co.uk/PDFs/CatNo82/Bu ... es2005.pdf
"TEMPUS FUGIT" the Novel -- Now Available!!
http://www.curtyengst.com
http://www.curtyengst.com
I'm pretty sure that's an amphenol connector based on the way the flange and the bayonet look.
Yeah, just checked at digikey, and it might be PT02E-12-8P-ND. Hard to say for sure without any physical dimensions.
check here:
http://search.digikey.com/scripts/DkSea ... E-12-8P-ND
The alignment notches inside the barrel and the pin assignments and positions all seem to be the same. There's also a size 16 version of this connector that's similar.
Hopefully from that you should be able to find the mating connector if that's what you're looking for.
Ned
Yeah, just checked at digikey, and it might be PT02E-12-8P-ND. Hard to say for sure without any physical dimensions.
check here:
http://search.digikey.com/scripts/DkSea ... E-12-8P-ND
The alignment notches inside the barrel and the pin assignments and positions all seem to be the same. There's also a size 16 version of this connector that's similar.
Hopefully from that you should be able to find the mating connector if that's what you're looking for.
Ned
Who is online
Users browsing this forum: No registered users and 73 guests