Recording Techniques, People Skills, Gear, Recording Spaces, Computers, and DIY
Moderators: drumsound, tomb
-
Ted White
- ass engineer
- Posts: 41
- Joined: Fri Jun 05, 2009 7:29 am
- Location: Michigan
-
Contact:
Post
by Ted White » Mon Jan 04, 2010 12:27 pm
General rule: As Norton says, standard fiberglass in a wall or ceiling is good stuff. In a ceiling, not much sense going past R19. Filling all the way with R30 won't give appreciable improvements.
Soundproofing Company
-
Glide
- audio school graduate
- Posts: 19
- Joined: Tue Jul 08, 2008 5:12 pm
- Location: Atlanta
Post
by Glide » Thu Jan 07, 2010 12:20 pm
If you are talking about soundproofing rather than room treating, you are going to have to buy sheetrock and build a room within a room. You'll also need green glue to go between doubled layers of 5/8" sheetrock. Anything less than that and you will hear each other pretty annoyingly next door.
-
Ted White
- ass engineer
- Posts: 41
- Joined: Fri Jun 05, 2009 7:29 am
- Location: Michigan
-
Contact:
Post
by Ted White » Thu Jan 07, 2010 12:25 pm
Soundproofing Company
-
Glide
- audio school graduate
- Posts: 19
- Joined: Tue Jul 08, 2008 5:12 pm
- Location: Atlanta
Post
by Glide » Thu Jan 07, 2010 6:42 pm
Wow - that is exactly how I built my basement studio. You guys did a great job on that.
One thing though - you might want to put a double solid door assembly on there also.
-
Ted White
- ass engineer
- Posts: 41
- Joined: Fri Jun 05, 2009 7:29 am
- Location: Michigan
-
Contact:
Post
by Ted White » Fri Jan 08, 2010 7:16 am
If possible, consider using solid core interior door slabs. They're heavier, as they're particleboard filled rather than foam filled.
Soundproofing Company
-
Nate Dort
- tinnitus
- Posts: 1039
- Joined: Mon Mar 08, 2004 6:07 pm
- Location: Detroit
-
Contact:
Post
by Nate Dort » Wed Jan 13, 2010 6:24 pm
Ted White wrote:If possible, consider using solid core interior door slabs. They're heavier, as they're particleboard filled rather than foam filled.
THIS.
I ended up removing four steel exterior (foam-filled) doors and replacing them with solid-core wood doors. The steel doors were resonating at certain frequencies and I just wasn't happy with the isolation. I sold all the steel doors on craigslist and got the solid core doors instead. Yeah, it cost me an extra $150 and a few extra hours of work, but the benefits far outweighed the cost.
-
Ted White
- ass engineer
- Posts: 41
- Joined: Fri Jun 05, 2009 7:29 am
- Location: Michigan
-
Contact:
Post
by Ted White » Wed Jan 13, 2010 6:36 pm
Nice Nate. Thanks for that assessment.
Soundproofing Company