Little Green Glue Question

Recording Techniques, People Skills, Gear, Recording Spaces, Computers, and DIY

Moderators: drumsound, tomb

Post Reply
john1056
alignin' 24-trk
Posts: 50
Joined: Tue Mar 17, 2009 7:12 am

Little Green Glue Question

Post by john1056 » Mon Jan 04, 2010 6:34 am

How thick is Green glue after installation when its sandwiched between two sheets of drywall? 1/8 inch? 1/16? Negligible?

Thanks!

Ted White
ass engineer
Posts: 41
Joined: Fri Jun 05, 2009 7:29 am
Location: Michigan
Contact:

Post by Ted White » Mon Jan 04, 2010 10:41 am

about 0.5mm
Soundproofing Company

john1056
alignin' 24-trk
Posts: 50
Joined: Tue Mar 17, 2009 7:12 am

Post by john1056 » Tue Jan 05, 2010 4:14 pm

Thanks! That's pretty thin. I guess that being the case the first wall should be very flat. Do people typically use tape and mud, or just mud the cracks?

Ted White
ass engineer
Posts: 41
Joined: Fri Jun 05, 2009 7:29 am
Location: Michigan
Contact:

Post by Ted White » Tue Jan 05, 2010 4:25 pm

It can accommodate a fairly irregular surface, surprisingly. A textured wall or ceiling is fine. Small popcorn is OK, but not great.

You want the seams sealed. Generally acoustic sealant, or drywall compound for small stuff.
Soundproofing Company

john1056
alignin' 24-trk
Posts: 50
Joined: Tue Mar 17, 2009 7:12 am

Post by john1056 » Wed Jan 06, 2010 2:00 pm

No tape then? What about seams where where is a dip in the drywall for the tape?

Ted White
ass engineer
Posts: 41
Joined: Fri Jun 05, 2009 7:29 am
Location: Michigan
Contact:

Post by Ted White » Wed Jan 06, 2010 2:01 pm

No need to worry about that recess.
Soundproofing Company

norton
buyin' a studio
Posts: 839
Joined: Thu Aug 07, 2003 4:42 pm
Location: minneapolis

Post by norton » Thu Jan 07, 2010 7:07 am

If you're talking about the outside finished surface... then yes. tape and mud is fine.

You can go the extra mile and run a bead of caulking down the mud bed first... but it's really not necessary. If the rock is installed in an acceptable fashion those seams are small enough that the only thing that's going to leak through them are very high frequencies... which are easily stopped by mud and tape.

Ted White
ass engineer
Posts: 41
Joined: Fri Jun 05, 2009 7:29 am
Location: Michigan
Contact:

Post by Ted White » Thu Jan 07, 2010 7:41 am

norton wrote: If the rock is installed in an acceptable fashion those seams are small enough that the only thing that's going to leak through them are very high frequencies... which are easily stopped by mud and tape.
Exactly. And part of the "acceptable fashion" would be to stagger the seams so the seams of the first layer do not coincide with the seams of the second layer.

This is a factor you can't get when using a single sheet of factory damped drywall.
Soundproofing Company

Post Reply

Who is online

Users browsing this forum: No registered users and 156 guests