I am using a stereo pan / volume pedal - Ernie Ball 6165, brand new. The volume curve is not linear (it suddenly gets loud with minimal pedal depression, then takes much more depression to get a bit more louder), and the pot is scratchy.
Seems like a simple pedal, know of any manufacturers who built a better stereo pan volume pedal?
Quality stereo pan / volume pedal
Quality stereo pan / volume pedal
"Artists to my mind are the real architects of change, and not the political legislators who implement change after the fact." William S Burroughs
Budget is under $200 - Gig FX Chopper is not an option. Just need a simple, quiet stereo pan volume pedal.
Using it in various guitar based applications.
Using it in various guitar based applications.
"Artists to my mind are the real architects of change, and not the political legislators who implement change after the fact." William S Burroughs
- calaverasgrandes
- ghost haunting audio students
- Posts: 3233
- Joined: Wed Jul 25, 2007 11:23 pm
- Location: Oakland
- Contact:
Those are pretty easy to mod. The ones I have owned were simple to work on, even the leads are attached with crimped spade lug type connectors instead of being soldered on. Why not just swap out the pot for a better one?
Also, most that I have seen have a 2nd pot that you can use to adjust the volume curve.
But before all that I would try sprayin some caiglube or deoxit in there.
Also, most that I have seen have a 2nd pot that you can use to adjust the volume curve.
But before all that I would try sprayin some caiglube or deoxit in there.
??????? wrote: "everything sounds best right before it blows up."
Sorry, thanks for the info, it's helpful...calaverasgrandes wrote:Those are pretty easy to mod. The ones I have owned were simple to work on, even the leads are attached with crimped spade lug type connectors instead of being soldered on. Why not just swap out the pot for a better one?
Also, most that I have seen have a 2nd pot that you can use to adjust the volume curve.
But before all that I would try sprayin some caiglube or deoxit in there.
"Artists to my mind are the real architects of change, and not the political legislators who implement change after the fact." William S Burroughs
I just got a 2nd 6165 to use for stereo panning - stereo in, stereo out, "pan" between the 2 channels. I'm finding that
- at 100% depressed, it lets through 100% of signal A and 0% of signal B
- at 0% depressed, it lets through a bit of signal A and most of signal B
So it doesn't do what it's supposed, sounds like it was sloppily calibrated in the factory.
These pedals get great reviews from guitarists, but both pedals I got are not quality, and they are not inexpensive for the quality.
I just need a simple stereo pan volume pedal. I don't care if it's string and pulleys, opto, whatever. I just need it to do it functions exactly and without noise.
I did some googling, and found some intense volume pedals with more features than I need, for over $200. Any other options? Too busy to hack new gear.
- at 100% depressed, it lets through 100% of signal A and 0% of signal B
- at 0% depressed, it lets through a bit of signal A and most of signal B
So it doesn't do what it's supposed, sounds like it was sloppily calibrated in the factory.
These pedals get great reviews from guitarists, but both pedals I got are not quality, and they are not inexpensive for the quality.
I just need a simple stereo pan volume pedal. I don't care if it's string and pulleys, opto, whatever. I just need it to do it functions exactly and without noise.
I did some googling, and found some intense volume pedals with more features than I need, for over $200. Any other options? Too busy to hack new gear.
"Artists to my mind are the real architects of change, and not the political legislators who implement change after the fact." William S Burroughs
Who is online
Users browsing this forum: digitaldrummer and 56 guests