Hello, I have had some issues during my first attempt at syncing my Tascam 388 and Logic. I would appreciate any help.
Here goes:
- I have striped the tape with the SMTPE signal (track 8 ).
- I set up logic to receive this signal (synchronization settings). The ruler turns blue, etc. I think I have the settings correct.
- I press play on the 388 and the SMPTE clock in Logic starts acting crazy. It goes to 00:59:43:01.25 with the last 2 digits (.25) spazzing out. So, the tape machine and Logic are "communicating" at least, but no success in getting the process to work properly.
That's as far as I can get. Any help would be great.
Thanks!
P.S. To clarify, I need to first send the striped track to Logic, but what is the process after that, in order to make sure every other track records in sync? Do I change the settings in Logic to make Logic the new master and the tape machine the slave?
Problem Syncing Tape with Logic
- No Wave Casio Kitsch
- re-cappin' neve
- Posts: 686
- Joined: Sun Sep 07, 2003 8:49 pm
- Location: Los Angeles
- Contact:
- No Wave Casio Kitsch
- re-cappin' neve
- Posts: 686
- Joined: Sun Sep 07, 2003 8:49 pm
- Location: Los Angeles
- Contact:
- No Wave Casio Kitsch
- re-cappin' neve
- Posts: 686
- Joined: Sun Sep 07, 2003 8:49 pm
- Location: Los Angeles
- Contact:
Who is online
Users browsing this forum: No registered users and 93 guests