Another Mystery Mic....
- tonewoods
- buyin' a studio
- Posts: 886
- Joined: Sat Apr 17, 2004 2:48 pm
- Location: Orcas Island, WA
- Contact:
Another Mystery Mic....
Hi all...
Picked these up recently, and would love to know what they are...
There's an indentation at the bottom of the mic that might have contained a label at one point--hoping that someone out there might have one that is intact...
American made, I think, judging by the Switchcraft XLR plugs...
They're heavy, and sound pretty decent...
Anyone?
Thanks!
Picked these up recently, and would love to know what they are...
There's an indentation at the bottom of the mic that might have contained a label at one point--hoping that someone out there might have one that is intact...
American made, I think, judging by the Switchcraft XLR plugs...
They're heavy, and sound pretty decent...
Anyone?
Thanks!
"You see, the whole thing about recording is the attempt at verisimilitude--not truth, but the appearance of truth."
Jerry Wexler
Jerry Wexler
- joelpatterson
- carpal tunnel
- Posts: 1732
- Joined: Tue Jun 10, 2003 5:20 pm
- Location: Albany, New York
- Mudcloth
- steve albini likes it
- Posts: 332
- Joined: Sat Nov 01, 2003 6:30 pm
- Location: Elgin, Texas
- Contact:
I don't know what mics those are, but I can tell you I hate switches on mics.
"This mic isn't working."
"Is the switch on?"
POP
"Okay, there we go."
"This mic isn't working."
"Is the switch on?"
POP
"Okay, there we go."
Matt Giles
Austin, Tx
http://www.mattguitargiles.com
http://www.myspace.com/mattguitargiles
http://www.thedrakesband.com/
How much is a stamp? I'll buy the goddamn stamp.
Austin, Tx
http://www.mattguitargiles.com
http://www.myspace.com/mattguitargiles
http://www.thedrakesband.com/
How much is a stamp? I'll buy the goddamn stamp.
- Gregg Juke
- cryogenically thawing
- Posts: 3544
- Joined: Fri Jun 11, 2010 10:35 pm
- Location: Buffalo, NY, USA
- Contact:
- rhythm ranch
- mixes from purgatory
- Posts: 2793
- Joined: Wed May 07, 2003 8:45 pm
- Location: Corrales, NM
- Gregg Juke
- cryogenically thawing
- Posts: 3544
- Joined: Fri Jun 11, 2010 10:35 pm
- Location: Buffalo, NY, USA
- Contact:
- tonewoods
- buyin' a studio
- Posts: 886
- Joined: Sat Apr 17, 2004 2:48 pm
- Location: Orcas Island, WA
- Contact:
rhythm ranch wrote:Altec University Sound 1656
Take a look here: http://universitysound.50megs.com/cat3page19.html
Thank you!!!
Good one...
Gawd, I love Altecs, and these will fit right in...
Here's the missing label:
"You see, the whole thing about recording is the attempt at verisimilitude--not truth, but the appearance of truth."
Jerry Wexler
Jerry Wexler
-
- gettin' sounds
- Posts: 149
- Joined: Fri Jun 06, 2003 10:15 am
- Location: LA
- Contact:
BAM!dubold wrote:yeah, tell me if you hear any change when I a/b them...joelpatterson wrote:Do you have a wav file of them on the quarter?
Also, don't forget to pay attention to the heads and tails of the track in mastering.
You fucking die!
http://mysteriousmammal.com
http://mysteriousmammal.com
Who is online
Users browsing this forum: No registered users and 57 guests