Were cut to 19 "size the front aluminum panel and printed circuit board with useless busses and VCA control.
Work only mic preamp, line amp and EQ
Output has only unbalanced.
Possible later to put a good output transformers.
4 Band Parametric Equalizer and 2 filters.
+48 and Phase.
At first glance, everything works fine!
In the coming days'll pick the studio and do a test on their equipment.
A little later, it will be possible to fix and re-design the front panel.
Or move the connectors on the rear panel.
I purposely left front panel 19 "in length for easy mounting. Although, if desired may be reduced to even smaller size.