Hello TOMB-ers,
I set up a club in Bed Stuy with a nice new rig centered around a Presonus 16.4.2a.
Can't for the life of me get the "network" features going.
Anybody have experience with one of these things?
Help w Presonus 16.4.2 Network in Brooklyn
No direct experience, but you might try the presonus forum, they're generally pretty helpful: http://forums.presonus.com
I did check the Presonus forum.
I finally got clued in by a friend.
The downloads and documents for the latest version of the 16.4.2 AI (AI being the important thing to know) were really super hidden on their site.
They only become available to you once you register the board w the serial number which btw is located on the bottom of the board so if you have installed it you have to pull it out to get the serial number.
It's a mighty powerful rig. Doing some club tours last year I really liked it from the being in the band perspective.
Now that the correct software is installed I'm sure the club is going to be very happy with it.
I finally got clued in by a friend.
The downloads and documents for the latest version of the 16.4.2 AI (AI being the important thing to know) were really super hidden on their site.
They only become available to you once you register the board w the serial number which btw is located on the bottom of the board so if you have installed it you have to pull it out to get the serial number.
It's a mighty powerful rig. Doing some club tours last year I really liked it from the being in the band perspective.
Now that the correct software is installed I'm sure the club is going to be very happy with it.
-
- steve albini likes it
- Posts: 326
- Joined: Tue Nov 02, 2004 2:11 pm
- Location: Brooklyn NY
- Contact:
Who is online
Users browsing this forum: No registered users and 33 guests