EV 666
-
- ass engineer
- Posts: 49
- Joined: Thu Oct 24, 2013 4:26 pm
- Location: Crete, IL
- Contact:
EV 666
I have a 666 that has a pretty weak low frequency response. Any idea what would cause this or what I can look for?
- digitaldrummer
- cryogenically thawing
- Posts: 3523
- Joined: Wed Nov 23, 2005 9:51 pm
- Location: Austin, Texas
- Contact:
I would look here first:
http://www.coutant.org/666r/
check the impedance setting on your mic. btw, how is yours wired? I think that original cannon connector does not mate with an XLR so you must have the pigtail... make sure its wired correctly too.
I have one of the EV 664's and when I got it it was wired incorrectly for high impedance but with an XLR... it sounded like shit. until I rewired it correctly.
Mike
http://www.coutant.org/666r/
check the impedance setting on your mic. btw, how is yours wired? I think that original cannon connector does not mate with an XLR so you must have the pigtail... make sure its wired correctly too.
I have one of the EV 664's and when I got it it was wired incorrectly for high impedance but with an XLR... it sounded like shit. until I rewired it correctly.
Mike
Who is online
Users browsing this forum: No registered users and 71 guests