CM Labs Motor Mix and Pro Tools 9 is this possible?
- clean_and_humble
- takin' a dinner break
- Posts: 167
- Joined: Sun Jan 13, 2008 4:02 pm
- Location: Brooklyn NY
- Contact:
CM Labs Motor Mix and Pro Tools 9 is this possible?
I recently got a Motor Mix for free. It's in working order the morons at my job thought the demo mode was malfunction so they tossed it and I grabbed it. I was hoping I could use it with my Pro Tools 9 on my macbook set up. I use a NI Komplete audio6 interface and I connected the motor mix via midi but no control connection was made. I emailed the cm labs guy and looked on their site for a driver but with pro tools they have a link for a driver that talks about an OMS folder I am assuming that is an older system. There are two links for digi002 but I have the digi003 system. Is there anyone who knows if the motor mix will work with pro tools 9?
Also there is this midimix program on the cm labs site that says you can control ableton with the motor mix that would be awesome but I do not think it is possible
Also there is this midimix program on the cm labs site that says you can control ableton with the motor mix that would be awesome but I do not think it is possible
- Nick Sevilla
- on a wing and a prayer
- Posts: 5555
- Joined: Mon Mar 03, 2008 1:34 pm
- Location: Lake Arrowhead California USA
- Contact:
http://www.cmlabs.net/motormixProtools.html
Maybe it works, maybe not, I could not find anything on the Avid website.
Just plug it into a MIDI port, create a new device, and let it fly.
Cheers
Maybe it works, maybe not, I could not find anything on the Avid website.
Just plug it into a MIDI port, create a new device, and let it fly.
Cheers
Howling at the neighbors. Hoping they have more mic cables.
- clean_and_humble
- takin' a dinner break
- Posts: 167
- Joined: Sun Jan 13, 2008 4:02 pm
- Location: Brooklyn NY
- Contact:
Obviously I did try the plug and play method the result of that lead me to asking the question here. I did email the cm labs guy and here is what he replied I have yet to try it will report back when I do but here is what is supposed to work:
MotorMix should work fine with Protools9.
You can use either their MotorMix or HUI personality which is available from Digi as a download or is included with Protools.
Run MotorMix in Protools mode. The LCD display will show "Open a Protools session to begin.
Best regards,
Carl Malone
MotorMix should work fine with Protools9.
You can use either their MotorMix or HUI personality which is available from Digi as a download or is included with Protools.
Run MotorMix in Protools mode. The LCD display will show "Open a Protools session to begin.
Best regards,
Carl Malone
- A.David.MacKinnon
- ears didn't survive the freeze
- Posts: 3820
- Joined: Wed May 07, 2003 5:57 am
- Location: Toronto
- Contact:
- clean_and_humble
- takin' a dinner break
- Posts: 167
- Joined: Sun Jan 13, 2008 4:02 pm
- Location: Brooklyn NY
- Contact:
- A.David.MacKinnon
- ears didn't survive the freeze
- Posts: 3820
- Joined: Wed May 07, 2003 5:57 am
- Location: Toronto
- Contact:
- clean_and_humble
- takin' a dinner break
- Posts: 167
- Joined: Sun Jan 13, 2008 4:02 pm
- Location: Brooklyn NY
- Contact:
Who is online
Users browsing this forum: No registered users and 49 guests