Tascam 22-2

[randrohe]

Hello all,
I have this 1/4" deck which has been in storage.
I fired it up recently and realized that the NON take up side (left) has a slightly bent spindle..DAMN YOU STORAGE!!!
I noticed this because the tape, when played, slows down to a stop, so, I'm figuring extra resistance from the misalignment.
I don't have much experience with reel players, nor maybe will I ever!
Major bummer as it was fine went it was put aside for remodeling.
I live in the middle of PA close to no one, and would like it repaired / reconditioned.
I know it's not a super high end deck, but would like to have it fixed if possible.
Can anyone point me in the right direction?
Hope the holidays treated everyone well!

thanks
Randy

[randrohe]

Searching around, I see on you tube the idea of using a spare take up reel, putting it on the spindle, and trying to gently bend it back.. I'm going use that as a last resort though. Would like to have it attended to professionally, and have it serviced at the same time..