Tascam 388 signal issue

Recording Techniques, People Skills, Gear, Recording Spaces, Computers, and DIY

Moderators: drumsound, tomb

Post Reply
illuminations
pluggin' in mics
Posts: 33
Joined: Fri Mar 18, 2011 10:28 am

Tascam 388 signal issue

Post by illuminations » Mon Sep 23, 2019 1:58 pm

Hello all,

Hoping someone might be able to give me some insight on a strange issue I'm having with my Tascam 388.

Essentially, I'm having a pan issue. All channels are basically coming through as a mono signal and will not pan. When I do pan left or right the signal gets quieter but stays mono. I've tested all of the outputs and the only one that will correctly pan is the monitor outs. Everything else is doing the weird mono thing. This happens when the mono button is up and down.

I've tried swapping all of the channel PCBs with my parts unit as well as the other PCBs in the mixer portion of the machine.

I should say that initially it started out that when panned to the right there would be no sound. Only when panned to the left. But then it morphed into this issue that is currently happening.

Post Reply

Who is online

Users browsing this forum: No registered users and 83 guests