Doors?

Recording Techniques, People Skills, Gear, Recording Spaces, Computers, and DIY

Moderators: drumsound, tomb

Post Reply
The Scum
resurrected
Posts: 2480
Joined: Thu Jul 03, 2003 11:26 pm
Location: Denver, CO
Contact:

Doors?

Post by The Scum » Fri Aug 07, 2020 2:15 pm

Does anyone have good pointers to soundproof doors?

The conversations with Overly & Kreiger made my wallet hurt.

I see a lot of less prestigious names (HMF Express?) with STC offerings around 50.

Pretty sure I don't want to pursue the John Brandt sand-filled door, though the Gervais "Superdoor" might be worth a closer look, though with parts & labor, it looks on par with some of the mid-grade prefabs.

Does anyone have door wisdom to impart?
"What fer?"
"Cat fur, to make kitten britches."

User avatar
losthighway
dead but not forgotten
Posts: 2006
Joined: Mon Apr 14, 2008 8:02 pm
Contact:

Re: Doors?

Post by losthighway » Fri Aug 07, 2020 5:45 pm

Double doors with frames as part of discrete wall assemblies, solid core doors with weather stripping. That did everything I needed it to, but I haven't tried recording a mandolin right next to the door while an Ampeg was roaring bass on the other side, so it's not like there's zero transmission. Just minimal enough not to be relevant.

User avatar
Nick Sevilla
speech impediment
Posts: 4988
Joined: Mon Mar 03, 2008 1:34 pm
Location: Lake Arrowhead California USA
Contact:

Re: Doors?

Post by Nick Sevilla » Fri Aug 07, 2020 6:06 pm

I used a steel French double entry door in my old place. Did a great job.

Forget the brand, but the contractor got it at Home Depot.

I remember, in 2008, it cost some 1K USD plus tax.
Howling at the neighbors. Hoping they have more mic cables.

User avatar
vvv
zen recordist
Posts: 9014
Joined: Tue May 13, 2003 8:08 am
Location: Chi
Contact:

Re: Doors?

Post by vvv » Sat Aug 08, 2020 8:10 am

They did carry on, more or less, with Ian Astbury many years later, but with Manzarek dead ...
bandcamp; vlayman;
THD; Geronimo Cowboys;
blog.
I mix with olive juice.

User avatar
roscoenyc
george martin
Posts: 1375
Joined: Sun Jun 03, 2007 5:56 pm
Location: NYC
Contact:

Re: Doors?

Post by roscoenyc » Sat Aug 08, 2020 10:00 am

The Gervais book is so valuable.
There's just so much good info in there.
I don't know how anybody could pass up such a great overview.

User avatar
DrummerMan
george martin
Posts: 1368
Joined: Thu Jun 05, 2008 12:18 pm
Location: Los Angeles
Contact:

Re: Doors?

Post by DrummerMan » Sun Aug 09, 2020 10:27 am

So, I made double semi-super doors for my garage studio. It was a 2 leaf system so that was what was appropriate, but even one of them blocks out *most* of the sound. Each door is a 1 3/4 thick solid core exterior prehung door. I special ordered them because the dimensions were not standard and also so I could get 4 of the heaviest duty hinges I could (instead of 3) to hold the Xtra weight. Then I put 1/4" MLV (I know, I know), then 1/2" plywood. These are heavy as fuck. I set those layers in from the edge so I could stagger the gap and use that space for neoprene stripping on the door frame.

The video below shows the sound blockage. The monitors are fairly loud in that video but not TOTALLY cranked. Back in January, I was recording doom guitar overdubs going out of 4 50-100watt half stacks simultaneously and with the doors fully closed, you could just barely hear it from 5 feet away. Same thing when i went to reamp the bass. I honestly didn't expect this much reduction from my build and was pleasantly surprised. Obviously there are many other factors involved but the doors were always my biggest fear.

https://vimeo.com/446254474
Geoff Mann
composer | drummer | Los Angeles, CA

drumsound
zen recordist
Posts: 6875
Joined: Tue Jun 01, 2004 10:30 pm
Location: Bloomington IL
Contact:

Re: Doors?

Post by drumsound » Sun Aug 09, 2020 9:21 pm

My friend owns the former Room and Board studio in Nashberg. As I recall the booth doors are actually 2 fairly heavy doors that have a gasket of some sort to glue them together. Maybe not the prettiest thing, but probably pretty effective.

User avatar
vernier
gettin' sounds
Posts: 141
Joined: Sun Jun 22, 2003 6:40 pm
Location: USA
Contact:

Re: Doors?

Post by vernier » Wed Aug 12, 2020 12:56 pm

Sound escapes through openings ..no matter how small. Seal off, tape up, block all gaps and openings.

Post Reply

Who is online

Users browsing this forum: No registered users and 24 guests