DDA DMR 12 owners or users question

Recording Techniques, People Skills, Gear, Recording Spaces, Computers, and DIY

Moderators: drumsound, tomb

Post Reply
hallymusic
audio school graduate
Posts: 10
Joined: Thu Aug 08, 2013 9:19 am
Location: ireland

DDA DMR 12 owners or users question

Post by hallymusic » Sun Feb 28, 2021 10:04 am

Hey,
Is anyone using a DDA DMR 12 board or have any experience using these desks?

I'm a bit confused about how to access the line input #1 on the input channels 33 to 44 on the right hand side of the board. I understand that when the line input #2 switch is depressed on the input channels 33 to 44, the Tape returns 13 to 24 are available on these channels. So these line in #2 signal paths are allowed for in the mutitrack Tape edac. However, unlike the input channels 1 to 32 on the left of the board where Line In 1 & 2 are available on the Edac Line inputs, there is no allocation for the line in #1 on the input channels 33 to 44 on any of the edac inputs. I'm probably missing something very simple or is it that the line ins on channels 33 to 44 are not available, just mic ins and Line #2 ins?

Hopefully somebody can explain this for...
Much appreciated
hally

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 33 guests