Looking For The Alps Catalogue No For This Tascam M300 Series Mixer Part
Looking For The Alps Catalogue No For This Tascam M300 Series Mixer Part
The part no in question is 5282011500. I cannot find it on any of the sites that claim to stock Tascam parts.
WWRHS?
-
- steve albini likes it
- Posts: 392
- Joined: Thu Jun 19, 2003 10:57 am
- Location: Austin, TX
- Contact:
Re: Looking For The Alps Catalogue No For This Tascam M300 Series Mixer Part
According to this google result
www.waynekirkwood.com/mci/mcisony.html.BAK
which is an automatic download that I could view once I deleted the .BAK extension,
you need a 10k audio taper pot. knowing that, I'll bet you can find ont that has the same terminals and dimensions, and you'll be good to go even if it's not the exact same one. Here's a mouser search field that narrows it to alps 10k audio pots:
https://www.mouser.com/Alps-Alpine/Pass ... JEALw_wcB
www.waynekirkwood.com/mci/mcisony.html.BAK
which is an automatic download that I could view once I deleted the .BAK extension,
you need a 10k audio taper pot. knowing that, I'll bet you can find ont that has the same terminals and dimensions, and you'll be good to go even if it's not the exact same one. Here's a mouser search field that narrows it to alps 10k audio pots:
https://www.mouser.com/Alps-Alpine/Pass ... JEALw_wcB
Re: Looking For The Alps Catalogue No For This Tascam M300 Series Mixer Part
Well, the legs/pins have to have a certain spacing otherwise they won't go into the holes on the circuit board.
I ended up getting a pair of 10K log pots simply because they no longer manufacture the linear version (which is what the originals were) with a 15" shaft and those are pure unobtanium NOS or used.
I ended up getting a pair of 10K log pots simply because they no longer manufacture the linear version (which is what the originals were) with a 15" shaft and those are pure unobtanium NOS or used.
WWRHS?
Who is online
Users browsing this forum: No registered users and 85 guests