tech for tascam and fostex machines
- I'm Painting Again
- zen recordist
- Posts: 7086
- Joined: Wed May 07, 2003 2:15 am
- Location: New York, New York
- Contact:
tech for tascam and fostex machines
a friend of mine needs to get a couple machines serviced and I'm out of the loop these days
close to NYC is preferable
anyone know anyone?
close to NYC is preferable
anyone know anyone?
- markjazzbassist
- tinnitus
- Posts: 1052
- Joined: Mon Apr 25, 2011 11:33 am
- Location: Cleveland
Re: tech for tascam and fostex machines
you could try denis at 238pro.com he fixes tascam cassette decks, not sure if he can do reel to reel.
-
- alignin' 24-trk
- Posts: 58
- Joined: Mon Aug 18, 2003 12:33 am
- Location: Huntsville, AL
- Contact:
Re: tech for tascam and fostex machines
You mention Tascam and Fostex, but not whether they are cassette-based or reel-to-reel machines. I work on cassette 4-track/8-track machines and can possibly make recommendations for open reel devices. Check in with your friend and get us a list of the specific machines, then I can give you more info.I'm Painting Again wrote: ↑Sun Nov 28, 2021 6:22 ama friend of mine needs to get a couple machines serviced and I'm out of the loop these days
close to NYC is preferable
anyone know anyone?
-Jack
- I'm Painting Again
- zen recordist
- Posts: 7086
- Joined: Wed May 07, 2003 2:15 am
- Location: New York, New York
- Contact:
Re: tech for tascam and fostex machines
these are open reel
tascam 38 "the hubs don't line up - the brakes doesnt work when you hit stop and maybe a few other things"
fostex 1/2"-16 "logic chip? wont play FF or RW"
tascam 38 "the hubs don't line up - the brakes doesnt work when you hit stop and maybe a few other things"
fostex 1/2"-16 "logic chip? wont play FF or RW"
-
- alignin' 24-trk
- Posts: 58
- Joined: Mon Aug 18, 2003 12:33 am
- Location: Huntsville, AL
- Contact:
Re: tech for tascam and fostex machines
I can't directly vouch for any of these, but they are all based in or near NYC:
https://ifixny.com/electronics-repair-nyc.html (Manhattan)
http://www.funktionaltech.com/other-services (Brooklyn)
http://www.analogique.com/serv.htm (Manhattan)
http://www.njfactoryservice.com/services.html (Mays Landing, NJ)
Best of luck!
-Jack
https://ifixny.com/electronics-repair-nyc.html (Manhattan)
http://www.funktionaltech.com/other-services (Brooklyn)
http://www.analogique.com/serv.htm (Manhattan)
http://www.njfactoryservice.com/services.html (Mays Landing, NJ)
Best of luck!
-Jack
- I'm Painting Again
- zen recordist
- Posts: 7086
- Joined: Wed May 07, 2003 2:15 am
- Location: New York, New York
- Contact:
Re: tech for tascam and fostex machines
thanks jack - wasn't aware of any of those
I'll forward them to my pal and keep looking here for any more suggestions
I'll forward them to my pal and keep looking here for any more suggestions
Re: tech for tascam and fostex machines
May’s Landing is a bit of a hike from NYC but I can vouch for Russ at NJ Factory Service. He did an awesome (plus fast and pretty affordable) job servicing my 388 and gave me a ton of good advice on rehabbing my back up 424. He’s been working on Tascam decks for 30 years and knows his shit. Good dude, great tech.
- I'm Painting Again
- zen recordist
- Posts: 7086
- Joined: Wed May 07, 2003 2:15 am
- Location: New York, New York
- Contact:
Re: tech for tascam and fostex machines
ty ty kindly for the recommendation
Who is online
Users browsing this forum: No registered users and 207 guests