Hi,
I need help with making a DIN to stereo XLR cable.
I have a B&O BM5. It currently has a 5 pin DIN cable.
The DIN is wired as:
1-black
4-red
2-bare
5-green
3-blue
Here's the schematic from B&O.
they state the BM5 is two BM6's on top of each other. (actually a BM6 and BM7).
So how would I wire the current DIN into a stereo XLR given this schematic?
thanks.
Help with DIN to stereo XLR cable
- rhythm ranch
- mixes from purgatory
- Posts: 2793
- Joined: Wed May 07, 2003 8:45 pm
- Location: Corrales, NM
Re: Help with DIN to stereo XLR cable
Sorry, can't see the image.
-
- gimme a little kick & snare
- Posts: 94
- Joined: Wed May 07, 2003 11:43 am
- Location: near boston
Re: Help with DIN to stereo XLR cable
hey, the image is "past the daily usage limit".
I'd bet that it's going to be this:
Left XLR:
Pin 1 goes to DIN2 (bare)
Pin 2 goes to DIN4 (red)
Pin 3 goes to DIN1 (black)
Right XLR
Pin 1 goes to DIN2 (bare)
Pin 2 goes to DIN3 (blue)
Pin 3 goes to DIN5 (green)
but I'd really love to see the schematic before I'd bet too much money on it. i'd say that if there were any problems with what I wrote it would be that I have left and right reversed, or I have the polarity reversed on the right one (blue and green reversed)
jerrymac
I'd bet that it's going to be this:
Left XLR:
Pin 1 goes to DIN2 (bare)
Pin 2 goes to DIN4 (red)
Pin 3 goes to DIN1 (black)
Right XLR
Pin 1 goes to DIN2 (bare)
Pin 2 goes to DIN3 (blue)
Pin 3 goes to DIN5 (green)
but I'd really love to see the schematic before I'd bet too much money on it. i'd say that if there were any problems with what I wrote it would be that I have left and right reversed, or I have the polarity reversed on the right one (blue and green reversed)
jerrymac
swingdoc wrote:Hi,
I need help with making a DIN to stereo XLR cable.
I have a B&O BM5. It currently has a 5 pin DIN cable.
The DIN is wired as:
1-black
4-red
2-bare
5-green
3-blue
Here's the schematic from B&O.
they state the BM5 is two BM6's on top of each other. (actually a BM6 and BM7).
So how would I wire the current DIN into a stereo XLR given this schematic?
thanks.
Re: Help with DIN to stereo XLR cable
http://www.villagephotos.com/pubbrowse. ... ted=579351
See if this link works.
The schematic should be the first or second image in the gallery.
Apparently this site has a "daily use limit" that will null the links if used too often??
I guess I gotta pay em to make it work betta...
Thanks!
See if this link works.
The schematic should be the first or second image in the gallery.
Apparently this site has a "daily use limit" that will null the links if used too often??
I guess I gotta pay em to make it work betta...
Thanks!
Re: Help with DIN to stereo XLR cable
bump
thanks
thanks
Who is online
Users browsing this forum: No registered users and 44 guests