phase reverse / esrever esahp
phase reverse / esrever esahp
hey all -
so, for years i've been mostly working digital and when it comes time to fix the phase on certain things (like a bass di + mic setup, or one or two drum micsout of phase with the overheads, etc.) it's always been a cinch to hit the "phase reverse" button on the eq plugin. but i've been moving to some analog stuff (i got a tascam 388 recently) and i was wondering if there are any such devices i could use to help me in these situations.
i have a couple of those little ART pre's, and they have phase switches on em, but i'd rather not have to send the signal thru it (and likely kill some of it - or at least color it differently) just to reverse the phase. there's gotta be some kinda box out there (cheap i hope) that i could use thru the inserts on the channels i need to fix.
and yes, i know the obvious answer is to have the phase fixed in the first place (during the recording)....i'm looking into those XLR adaptors (male-female) that reverse the phase in the wiring, but in the meantime, i need something to fix the tracks i've already recorded.
thanks y'all-
jimbo
so, for years i've been mostly working digital and when it comes time to fix the phase on certain things (like a bass di + mic setup, or one or two drum micsout of phase with the overheads, etc.) it's always been a cinch to hit the "phase reverse" button on the eq plugin. but i've been moving to some analog stuff (i got a tascam 388 recently) and i was wondering if there are any such devices i could use to help me in these situations.
i have a couple of those little ART pre's, and they have phase switches on em, but i'd rather not have to send the signal thru it (and likely kill some of it - or at least color it differently) just to reverse the phase. there's gotta be some kinda box out there (cheap i hope) that i could use thru the inserts on the channels i need to fix.
and yes, i know the obvious answer is to have the phase fixed in the first place (during the recording)....i'm looking into those XLR adaptors (male-female) that reverse the phase in the wiring, but in the meantime, i need something to fix the tracks i've already recorded.
thanks y'all-
jimbo
- psychicoctopus
- buyin' a studio
- Posts: 890
- Joined: Wed May 14, 2003 3:01 am
- Location: Austin, TX
Re: phase reverse / esrever esahp
you could wire an XLR cable to do it. Just switch the connections to pins 2 and 3 on one end.
- wayne kerr
- ears didn't survive the freeze
- Posts: 3873
- Joined: Thu May 08, 2003 10:11 am
Re: phase reverse / esrever esahp
Plus remember that the polarity switch (or polarity-reversed cable) only do just that - reverse POLARITY which is an electrical property. If two or more sources arrive at the transducer at different times, they are STILL out of PHASE! I rarely use the polarity switch - usually only on SD if I'm using a snare-side mic. And even then, it takes careful mic placement to get the two signals "in phase." IE: you need to get them 180deg OUT of phase first, and then reverse the polarity!
CC
PP
CC
PP
The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.
-Hunter S. Thompson
-Hunter S. Thompson
-
- audio school graduate
- Posts: 13
- Joined: Thu Aug 05, 2004 4:37 pm
- Location: portland
- Contact:
Re: phase reverse / esrever esahp
Hello, my mic pre's have phase reversal buttons - do I want to use them so that a stereo pair is OUT of phase - ? like recording 2 fiddles , or stereo drums?
Thanks for the help.
Thanks for the help.
Todd
-
- dead but not forgotten
- Posts: 2037
- Joined: Wed Sep 22, 2004 10:22 am
- Location: Ramah, New Mexico
Re: phase reverse / esrever esahp
Jimbo if you've tracked to tape the answer is no. There's no way to fix your phasing issues once you've committed to tape.
And using the phase reverse button on your mic pre (when you're tracking) is totally a last resort.
It is, however, interesting to use when you're tracking in mono and find that your mic takes on a different color when the phase is reversed. Or maybe that your crappy chinese mic sounds better with the polarity flipped. i discovered that on one of my MXL mic's. Kinda funny, actually.
Like the others have said, ya gotta get it right from the start dude.
And using the phase reverse button on your mic pre (when you're tracking) is totally a last resort.
It is, however, interesting to use when you're tracking in mono and find that your mic takes on a different color when the phase is reversed. Or maybe that your crappy chinese mic sounds better with the polarity flipped. i discovered that on one of my MXL mic's. Kinda funny, actually.
Like the others have said, ya gotta get it right from the start dude.
-
- dead but not forgotten
- Posts: 2105
- Joined: Thu Jul 17, 2003 11:04 am
- Location: phoenix
Re: phase reverse / esrever esahp
I'm surprised and disappointed that a manufacturer actually labels it a phase reverse button. As was said, just saying the word 'phase' implies a time difference between two things. Flipping the polarity (which is what these switches do) inverts the wave form of a single source, so to speak, but doesn't change its placement in time, nor it's relationship to other waveforms, timewise.
Sometimes, switching polarity will get you better results than leaving it, but you're still dealing with some amount of comb filtering.
Sometimes, switching polarity will get you better results than leaving it, but you're still dealing with some amount of comb filtering.
Re: phase reverse / esrever esahp
Do what sounds right to you. Listen to the stereo tracks within the mix and hit one of the phase buttons from the stereo track in question. Does the recorded instrument all of a sudden jump out in the mix or does it kinda get lost?todd aschoff wrote:Hello, my mic pre's have phase reversal buttons - do I want to use them so that a stereo pair is OUT of phase - ? like recording 2 fiddles , or stereo drums?
Thanks for the help.
boom-ptch-boom
- I'm Painting Again
- zen recordist
- Posts: 7086
- Joined: Wed May 07, 2003 2:15 am
- Location: New York, New York
- Contact:
Re: phase reverse / esrever esahp
Get it right at the source..there is no better advice in making records..
Here are some products that might poke your interest..little labs IPB and IPBjr.
http://www.mercenary.com/litlabibpanp.html
http://www.mercenary.com/lilaibpjr.html
Here are some products that might poke your interest..little labs IPB and IPBjr.
http://www.mercenary.com/litlabibpanp.html
http://www.mercenary.com/lilaibpjr.html
-
- gettin' sounds
- Posts: 127
- Joined: Mon Oct 04, 2004 9:14 am
- Location: Brooklyn, NY
Re: phase reverse / esrever esahp
I have not used the Little Labs box, but I am pretty sure they attempt to remedy phasing problems by allowing the user variable phase from 0-180.chocolatechickenpunkpie wrote:Plus remember that the polarity switch (or polarity-reversed cable) only do just that - reverse POLARITY which is an electrical property. If two or more sources arrive at the transducer at different times, they are STILL out of PHASE! I rarely use the polarity switch - usually only on SD if I'm using a snare-side mic. And even then, it takes careful mic placement to get the two signals "in phase." IE: you need to get them 180deg OUT of phase first, and then reverse the polarity!
CC
PP
Can anybody confirm how well that feature works? Seems like everybody loves that box.
Any body know of a plugin that does what that box does?
tony echos
-
- audio school graduate
- Posts: 13
- Joined: Thu Aug 05, 2004 4:37 pm
- Location: portland
- Contact:
Re: phase reverse / esrever esahp
I have used the phase reverse swithces on my Digitech VTP-1, but only for experimental purposes. I am trying to figure out when to use the switches on recordings - do i purposely switch the phase on stereo overheads, or use a phase reversal to send something way back in the mix?
Todd
-
- gettin' sounds
- Posts: 127
- Joined: Mon Oct 04, 2004 9:14 am
- Location: Brooklyn, NY
Re: phase reverse / esrever esahp
In my experience, it is very rare that two mics I am using are perfectly out of phase so as to allow correction by flipping the phase switch on one of them...todd aschoff wrote:I have used the phase reverse swithces on my Digitech VTP-1, but only for experimental purposes. I am trying to figure out when to use the switches on recordings - do i purposely switch the phase on stereo overheads, or use a phase reversal to send something way back in the mix?
HOWEVER, sometimes, flipping the phase switch in addition to re-positioning one of the two mics, can either fix the problem, or sound cool (in an out-of-phase kinda way, which is usually a "hollow" tone).
Experiment. You cannot break anything by going out of phase!
tony
Who is online
Users browsing this forum: No registered users and 56 guests