Low-pass filters

general questions, comments and ideas about recording, audio, music, etc.
Locked
cactus
takin' a dinner break
Posts: 179
Joined: Thu Jun 19, 2003 9:13 pm

Low-pass filters

Post by cactus » Fri Jun 20, 2003 10:32 pm

Anybody make a decent outboard EQ with a LPF? I really need one for production. EQ's not so important, just the filter.

I've been shelving lows way up and highs way down in the meantime, but I'd rather not do that anymore.

Moog makes the one pedal (which would be perfect), but it's not a balanced unit. I'd have to re-amp it, right?

anybody with gear tips or other, please chip in.
thanks

Recording Engineer
steve albini likes it
Posts: 345
Joined: Mon May 12, 2003 3:09 am
Location: Sacramento, CA
Contact:

Re: Low-pass filters

Post by Recording Engineer » Sat Jun 21, 2003 2:44 am

Don't know, but maybe the last couple items on the bottom of this page might help:
http://www.blackaudio.com/inline.htm

Great company... Dealt with Bruce a few times...

User avatar
rhythm ranch
mixes from purgatory
Posts: 2793
Joined: Wed May 07, 2003 8:45 pm
Location: Corrales, NM

Re: Low-pass filters

Post by rhythm ranch » Sat Jun 21, 2003 7:41 am

The Mooger Fooger Low Pass Filter can handle quite a range of signals. What are trying to accomplish?

cactus
takin' a dinner break
Posts: 179
Joined: Thu Jun 19, 2003 9:13 pm

Re: Low-pass filters

Post by cactus » Sat Jun 21, 2003 12:52 pm

Well, I prefer to record bass tracks with electric guitar, remove everything above about 100Hz or so, and have a light acoustic guitar play the same notes (among other uses for a LPF) - kind of gives it a synthetic upright sound that I like.

Anyway, the only LPF I have was the one that came with ProTools and it only takes out 3k & up...

I just want to have an outboard LPF. It would be incredibly helpful 'round here.

ctmsound
george martin
Posts: 1259
Joined: Thu Jun 05, 2003 10:43 pm
Location: Sacramento, CA

Re: Low-pass filters

Post by ctmsound » Sat Jun 21, 2003 1:13 pm

Just get a sweet parametric.

User avatar
Rodgre
carpal tunnel
Posts: 1744
Joined: Fri May 30, 2003 3:19 am
Location: Central MA
Contact:

Re: Low-pass filters

Post by Rodgre » Sun Jun 22, 2003 3:14 am

look for a couple of used Electrix Filter Queens.

A good parametric is the best way to go, but if you just need a good sounding LPF, the Filter Queen and the Filter Factory are quite nice. I also like the moogerfooger LPF as well.

I use any one of these three to add some "boom" to kick drum tracks sometimes.

Roger

User avatar
NewYorkDave
re-cappin' neve
Posts: 679
Joined: Fri May 09, 2003 9:47 am
Location: New York, Hudson Valley

Re: Low-pass filters

Post by NewYorkDave » Sun Jun 22, 2003 2:19 pm

If you're dealing with known source and load impedances, a homemade passive filter is easy to implement. Do a Google search on terms like "passive filter" and "lowpass" and you should find some useful info.

You can make a one-pole lowpass filter out of a resistor and a cap; poles can be cascaded for steeper response. You can use a capacitor-inductor filter for a sharper response, but good inductors aren't so readily available.

cactus
takin' a dinner break
Posts: 179
Joined: Thu Jun 19, 2003 9:13 pm

Re: Low-pass filters

Post by cactus » Sun Jun 22, 2003 3:34 pm

Rodgre
those electrix don't look too bad. and there's plenty on ebay for about $70.
btw
, is "the curtain society" the same as the old Bedazzled band?

anicorettenightmare@hotmail.com

User avatar
A.David.MacKinnon
ears didn't survive the freeze
Posts: 3822
Joined: Wed May 07, 2003 5:57 am
Location: Toronto
Contact:

Re: Low-pass filters

Post by A.David.MacKinnon » Sun Jun 22, 2003 10:18 pm

I've got a great old Altec 2 channel hi pass/low pass filter. It's passive. Sounds great. They sometimes turn up on ebay.

User avatar
Rodgre
carpal tunnel
Posts: 1744
Joined: Fri May 30, 2003 3:19 am
Location: Central MA
Contact:

Re: Low-pass filters

Post by Rodgre » Sun Jun 22, 2003 10:33 pm

cactus wrote:Rodgre
those electrix don't look too bad. and there's plenty on ebay for about $70.
btw
, is "the curtain society" the same as the old Bedazzled band?

anicorettenightmare@hotmail.com
For $70, they're a steal. I bought the Filter Queens for $49 when GC was blowing them out, and the Filter Factory for $99.....

And I'm not sure, but I think I resent the term "old", but yes, that's the same Curtain Society. Thanks for asking. We have a new CD in the can, and since Bedazzled is no longer, we're looking for a home for it. Check out the website!

Roger

Locked

Who is online

Users browsing this forum: No registered users and 21 guests