Pacific Pro Audio R-one Ribbon engraving and logo
-
- re-cappin' neve
- Posts: 798
- Joined: Wed May 07, 2003 5:14 pm
Pacific Pro Audio R-one Ribbon engraving and logo
OK so we are also going to be able to get an engraving or a logo put on the mic. and guess what it cost Nothing. it's absolutley Free!!!!
so i'm thinking about this logo with Tape Op in the back Ground. i think it would be great and perfect for the people who are buying this.
we could have it all in red or it's possible all this design would be engraved.
i want approval of the design and i want to know if everyone is fine with this idea. if it is discovered that the design is not what everyone wants...i think we should come up with one that would be appropiate. too me it's not really a big deal, but since it is free it would be cool to have a kick ass design or logo. i think the rooster is really cool and i think the logo of tape OP in the back ground would be the icing on the cake.
please read and let me know what you think. thanks
so i'm thinking about this logo with Tape Op in the back Ground. i think it would be great and perfect for the people who are buying this.
we could have it all in red or it's possible all this design would be engraved.
i want approval of the design and i want to know if everyone is fine with this idea. if it is discovered that the design is not what everyone wants...i think we should come up with one that would be appropiate. too me it's not really a big deal, but since it is free it would be cool to have a kick ass design or logo. i think the rooster is really cool and i think the logo of tape OP in the back ground would be the icing on the cake.
please read and let me know what you think. thanks
Re: Pacific Pro Audio R-one Ribbon engraving and logo
ummm...
this:
(.Y.)
boobs
Please...
this:
(.Y.)
boobs
Please...
- greatmagnet
- buyin' a studio
- Posts: 913
- Joined: Thu Oct 16, 2003 2:10 pm
- Location: Santa Rosa, CA
- Contact:
Re: Pacific Pro Audio R-one Ribbon engraving and logo
Am I missing something here? Why a rooster? Is there a pun flying over my head?
FYI I'm actually a graphic designer by trade (engineer at night only) and a pretty durned good one if I do say so. So, if we need some help for something more custom...
FYI I'm actually a graphic designer by trade (engineer at night only) and a pretty durned good one if I do say so. So, if we need some help for something more custom...
"All energy flows in accordance with the whims of the great Magnet"
?Raoul Duke
www.greatmagnetrecording.com
?Raoul Duke
www.greatmagnetrecording.com
Re: Pacific Pro Audio R-one Ribbon engraving and logo
I think the Cock logo is cool enough. I like the idea of having a logo, I really don't care what it is. Maybe something that says "2005"?
"If you will starve unless you become a rock star, then you have bigger problems than whether or not you are a rock star. " - Steve Albini
- trodden
- on a wing and a prayer
- Posts: 5692
- Joined: Wed May 07, 2003 8:21 am
- Location: C-attle
- Contact:
Re: Pacific Pro Audio R-one Ribbon engraving and logo
Cocks are cool,
but so are boobs..
what about emotidongs?
8=====D---*
but so are boobs..
what about emotidongs?
8=====D---*
-
- re-cappin' neve
- Posts: 798
- Joined: Wed May 07, 2003 5:14 pm
Re: Pacific Pro Audio R-one Ribbon engraving and logo
Caldo71
if you're a graphic designer. then maybe you could come up with a great design. the rooster was suggested because of the chinese new year. it is chinese mic and it looks cool anyways. i think incorporating the year 2005 and Tape OP in the logo would be cool too.
here are some ideas, but i know you could do a way better job.
if you're a graphic designer. then maybe you could come up with a great design. the rooster was suggested because of the chinese new year. it is chinese mic and it looks cool anyways. i think incorporating the year 2005 and Tape OP in the logo would be cool too.
here are some ideas, but i know you could do a way better job.
- trashy
- dead but not forgotten
- Posts: 2128
- Joined: Wed May 07, 2003 10:30 am
- Location: Red Bluff, CA
- Contact:
Re: Pacific Pro Audio R-one Ribbon engraving and logo
^
That should be it.
Re: Pacific Pro Audio R-one Ribbon engraving and logo
I'd go with the TapeOp logo.
- ubertar
- ears didn't survive the freeze
- Posts: 3775
- Joined: Wed Feb 18, 2004 7:20 pm
- Location: mid-Atlantic US
- Contact:
Re: Pacific Pro Audio R-one Ribbon engraving and logo
I'm confused here. Garth didn't mention a logo in any thread I've seen. Am I missing something? Link, please. That said, (.Y.) is pretty nice, with Tape Op underneath.
- inverseroom
- on a wing and a prayer
- Posts: 5031
- Joined: Wed May 07, 2003 8:37 am
- Location: Ithaca, NY
- Contact:
Re: Pacific Pro Audio R-one Ribbon engraving and logo
Rooster's nice, though I'd just prefer the TO logo.
Re: Pacific Pro Audio R-one Ribbon engraving and logo
regarding the boobs and the emotidong.. seriously, they should be considered. if we make the logo look "real", then whats the point of designing a logo?
it is certainly far more in the tapeop spirit to make something fiercely uncorporate.
(.Y.) and umm.. the 8====PPA=====D - - - -
there is no way in 200 billion years any company hoping to sell microphones would put something like that on.
that is why we should do it.
it is certainly far more in the tapeop spirit to make something fiercely uncorporate.
(.Y.) and umm.. the 8====PPA=====D - - - -
there is no way in 200 billion years any company hoping to sell microphones would put something like that on.
that is why we should do it.
- trodden
- on a wing and a prayer
- Posts: 5692
- Joined: Wed May 07, 2003 8:21 am
- Location: C-attle
- Contact:
Re: Pacific Pro Audio R-one Ribbon engraving and logo
agreed.eeldip wrote:regarding the boobs and the emotidong.. seriously, they should be considered. if we make the logo look "real", then whats the point of designing a logo?
it is certainly far more in the tapeop spirit to make something fiercely uncorporate.
(.Y.) and umm.. the 8====PPA=====D - - - -
there is no way in 200 billion years any company hoping to sell microphones would put something like that on.
that is why we should do it.
in the the spirit of THAT SHIT DON'T PLAY IN LA HOMIE..
buck the system, this is tapeop.
- Mark Alan Miller
- dead but not forgotten
- Posts: 2097
- Joined: Wed Apr 14, 2004 6:58 pm
- Location: Western MA
- Contact:
Re: Pacific Pro Audio R-one Ribbon engraving and logo
I like the idea of the TapeOp logo, personally...
he took a duck in the face at two and hundred fifty knots.
http://www.radio-valkyrie.com/ao/aoindex.htm - download the new record (free is an option!) or get it on CD.
http://www.radio-valkyrie.com/ao/aoindex.htm - download the new record (free is an option!) or get it on CD.
-
- zen recordist
- Posts: 7483
- Joined: Tue Jun 01, 2004 10:30 pm
- Location: Bloomington IL
- Contact:
Re: Pacific Pro Audio R-one Ribbon engraving and logo
How about just a simple reel like on the TapeOp.com navigation box? The rooster is a bit much IMNSHO.
-
- steve albini likes it
- Posts: 361
- Joined: Sun Sep 26, 2004 8:57 pm
- Location: Portland, OR
Re: Pacific Pro Audio R-one Ribbon engraving and logo
A logo would be fine. The less words the better, in my opinion. The chinese cock is ok. Tape Op in a nice typed looking text would be nice as well. Cock, text or text-cock combo has my go ahead.
Who is online
Users browsing this forum: No registered users and 28 guests