I bought this 80-8 off Eeldip and I just got my MRL and the thing is dead &*)(*&()**_) on at 250 reference flux. I can't believe my eyes.
Well anyway the azimuth is off by about 30 degrees at 16 K on both the synch and repro heads. Do I adjust the whole headblock to get them both right or do I adjust the individual heads seperatly and how?
Adjusting Azimuth on an 80-8
Re: Adjusting Azimuth on an 80-8
Eddie Ciletti's website is the best place to check out all things analogue related!
Cheers
Al
Cheers
Al
Re: Adjusting Azimuth on an 80-8
According to the Owner's Reference Manual, adjust the heads individually. There are a pair of tiny hex screws on top of each head.
Let me know if you need any more specific information from the manual.
Chet
Let me know if you need any more specific information from the manual.
Chet
Who is online
Users browsing this forum: No registered users and 47 guests