hey, the image is "past the daily usage limit".
I'd bet that it's going to be this:
Left XLR:
Pin 1 goes to DIN2 (bare)
Pin 2 goes to DIN4 (red)
Pin 3 goes to DIN1 (black)
Right XLR
Pin 1 goes to DIN2 (bare)
Pin 2 goes to DIN3 (blue)
Pin 3 goes to DIN5 (green)
but I'd really love to see the schematic before I'd bet too much money on it. i'd say that if there were any problems with what I wrote it would be that I have left and right reversed, or I have the polarity reversed on the right one (blue and green reversed)
jerrymac
swingdoc wrote:Hi,
I need help with making a DIN to stereo XLR cable.
I have a B&O BM5. It currently has a 5 pin DIN cable.
The DIN is wired as:
1-black
4-red
2-bare
5-green
3-blue
Here's the schematic from B&O.
they state the BM5 is two BM6's on top of each other. (actually a BM6 and BM7).
So how would I wire the current DIN into a stereo XLR given this schematic?
thanks.
![Image](http://img.villagephotos.com/p/2003-11/464885/TJZFF-BM6schematic.JPG)