This is the 1/4" patch bay that we used when we ran our 16 track. There is a standard 19" rack-wide frame, (we used it mounted with a hinge for great rear access) and 3 seperate patch bay pieces. One is the standard 96 position patch bay. Of the other two pieces, one has 24 and the other 20 jacks. Neatly coiled wires with their ends (XLR and 1/4") are still soldered to the bays. Each bay has anti-stress bars mounted at the rear.
Please let me know if you have questions.
$50.00 OR BEST OFFER
FS: Patch Bay 1/4" - 140 slot/framed/cables & ends
Moderators: TapeOpLarry, tomb
-
- audio school graduate
- Posts: 12
- Joined: Thu Feb 09, 2006 2:38 pm
- Location: Raleigh, North Carolina
FS: Patch Bay 1/4" - 140 slot/framed/cables & ends
After 20 years of recording some great local music, we had to shut it down. This is a list of the final pieces of gear and cables'n'ends.
-
- gimme a little kick & snare
- Posts: 77
- Joined: Thu Jan 20, 2005 1:38 pm
- Location: bklyn,ny
-
- audio school graduate
- Posts: 12
- Joined: Thu Feb 09, 2006 2:38 pm
- Location: Raleigh, North Carolina
Hang on a bit guys, a local dude is supposed to come to my house tomorrow & buy the patch bay - if that happens I will remove this post - but I thank you very much for your interest!
Joy
Joy
After 20 years of recording some great local music, we had to shut it down. This is a list of the final pieces of gear and cables'n'ends.
Who is online
Users browsing this forum: No registered users and 13 guests