Price Reduced: Mini Synth DIY Kits

[lanxe]

Hey,
these are the geiger counter minisynths on http://www.thoserecords.com/egon.htm

you can also part your own out from here:
www.musicfromouterspace.com (we are selling the yellow one on the front page)

So......We have a few unbuilt "kits" we want to sell. These kits include everything you need to build a minisynth EXCEPT: wire and solder, and tools (wire strippers, soldering iron, pliers, etc)

The kits DO come with:
- a geiger counter case (as seen here http://www.thoserecords.com/egon.htm )
- Ray's Nice professionally made PCB
- All PCB components (resistors, caps, transistors, IC's, Diodes, etc)
- All Panel Mount components (Jacks, switches and pots)
-battery holders

in order to "break even" we are asking $149 USD for a kit plus shipping.
hope this is fair.

for more info or questions, email me a egon@thoserecords.com

we have a couple of populated pcb's for sale as well ( gone/sold)
And we can also sell empty cases if you are interested ($45 USD)

we do have a couple of completely built synthesizers for sale but we arent going to build any more (gone/sold).
well, I think we got in over our heads trying to build complete synths (for anybody that has built one knows that it takes some time to wire everything up, so multiply that by about thirty) so we are inclined to sell kits for basically no profit to us.

Thanks,
Ryan

[lanxe]

more info:

100% ANALOG

-TWO VCO's (voltage controlled oscillators): VCO #1 has sawtooth wave with a coarse tuner and routing switches to the envelope generator and LFO (low frequency oscillator). VCO #2 has sawtooth and pulse wave with variable pulse width with a coarse tuner and routing switches to the envelope generator, lfo pulse width modulation and oscillator 1 sync

- Three way mixer (oscillator 1, oscillator 2 and White Noise Generator)

VCF - Band-Pass or Low-Pass Filter with high resonance ring knob, with routing switches to the envelope generator and LFO

LFO - high or low range frequency switch, ramp, sawtooth, triangle and square waveforms.

VCA - (voltage controlled amplifier) modulation switches to envelope generator and LFO.

EG - Attack / Release envelope generator with manual gate button, gate/trigger switch, and repeat function

Master output and power switch

CV inputs for both VCO's, Gate input and output jacks
also very easy to add an input for audio into the filters

[lanxe]

Still have a few kits left.........take them off of my hands for about what we paid for them (buying parts in bulk).

I will post some kit pictures here later if there is some interest.

Thanks,
Ryan

[lanxe]

Here are some pictures of the kits........

Price reduced to $149 USD for an unlabeled box kit (similar to the one in the picture)

email questions to
egon@thoserecords.com





Here is a labeled box (only two left)

[lanxe]

bump........some are selling, lots of interest, but we still have more!

dont be intimidated.....its an easy beginner project, if you take your time and double check your work