AH MY BELOVED TAPE-OP-ENHEIMERS...
YOU need balanced cable snakes/looms with good connectors, and I need cash/trade.
I've got what you need to hook up your deck(s) to your board or patchbays. I used to co-own Seattle's Private Radio Recording ('91-'03), but due to Parkinson's I just can't put in the needed hours anymore. These snakes/looms were in our 'some ends needing to be fixed' pile in '04 when I packed them away;-- and I CANNOT TEST THEM for functionality-- so the whole package is sold AS IS. You should assume that you'll be soldering some to make sure all is well. Parkinson's makes soldering completely out of the question for me, so THIS WILL BE A BARGAIN FOR YOU.
WHAT YOU'LL GET IS:
-- (1) 30' (?, probably more) MOGAMI 24X24 BALANCED XLRM TO TRS SNAKE/LOOM, WITH 24 XLRM on one end, and 16 TRS 1/4" on the other end (no connectors attached on that end);
-- (3) 20' (?, probably more) MARYLAND SOUND INDUSTRIES BC-4922-9 (9X9 BALANCED) SNAKE/LOOMS; AND
--(20) NEUTRIK NY-S228 3-Conductor TRS 1/4" MALE CONNECTORS--NEW;
--(39) NEUTRIK NC*FX 3-Conductor XLR FEMALE CONNECTORS--NEW;
--(12) NEUTRIK NC*MX 3-Conductor XLR MALE CONNECTORS--NEW;
--(16) NEUTRIK NP3TT-P-B 3-Conductor TT MALE CONNECTORS (used);
--(03) SWITCHCRAFT A3M 3-conductor XLR MALE CONNECTORS (used);
--plus, an assortment of balanced mic cabling (raw), probably ProCo-- ?60';
--and a few other bits and bobs, like a DIY D.I. assortment: box, cables, connectors, no transformer; ALSO a good-quality 'bulb type' de-soldering gun.
THESES ARE GREAT QUALITY CABLING AND CONNECTORS. Quiet, low-cap, long enough to be really flexible for your use. <b>THE WHOLE PACKAGE is yours for $200 less shipping; IF YOU ARE LOCAL IN PORTLAND, OREGON, or close by, I will consider trade for a BRAND NEW, IN BOX 19" LCD monitor with either a DVI-D or VGA connector, OR an EXTERNAL 'LightScribe' cd/dvd burner and/or a fast FW hard-drive of comparable value-- also must be new in box.<b> If not local, it's sale only-- I will need to assure that the monitor/drive(s) works with my Mac if we trade.
I really prefer PayPal, cash, bank check, or bank/post office money order. If these need to be shipped to you, I'll find the cheapest method of UPS-- I only ship insured(at no extra charge) via trackable shippers. THANKS FOR LOOKING!
PS-- I've also got an Anvil briefcase & more cables for sale here, plus a Digitech VHM-5 'vocalist' harmonizer with orig. power and manual; a Roland GS-6 guitar pre/fx in box; and a Roland U-220 multi-timbral synth module in box with manual.
THANKS FOR LOOKING!
