Nady RSM-5 Ribbon Mic $99.99
Moderators: TapeOpLarry, tomb
- rhythm ranch
- mixes from purgatory
- Posts: 2793
- Joined: Wed May 07, 2003 8:45 pm
- Location: Corrales, NM
Nady RSM-5 Ribbon Mic $99.99
Thought there might be some interest:
Musician's Friend has the RSM-5 on their "Stupid" sale for $99.99.
Musician's Friend has the RSM-5 on their "Stupid" sale for $99.99.
- the velour fog
- buyin' a studio
- Posts: 874
- Joined: Wed May 07, 2003 9:38 am
-
- george martin
- Posts: 1347
- Joined: Mon Nov 13, 2006 8:47 pm
- Location: home on the range
- the velour fog
- buyin' a studio
- Posts: 874
- Joined: Wed May 07, 2003 9:38 am
- the velour fog
- buyin' a studio
- Posts: 874
- Joined: Wed May 07, 2003 9:38 am
Mine has been in the "being packed" stage since last Thursday. I better need the jaws of life to open up the package
________
BABE BLONDE
________
BABE BLONDE
Last edited by kojdogg on Thu Mar 17, 2011 6:30 am, edited 1 time in total.
-
- pushin' record
- Posts: 227
- Joined: Fri Dec 02, 2005 6:36 pm
- Location: Orlando, FL
- Contact:
Check your mix in mono.
www.mixmonsterz.com
www.mixmonsterz.com
great! thanks!Sean Shannon wrote:I used the cables from here:
http://www.pulsartech.net
Very inexpensive, and work fine.
"I try to hate all my gear equally at all times to keep the balance of power in my favor." - Brad Sucks
- Sean Sullivan
- moves faders with mind
- Posts: 2555
- Joined: Sat Mar 31, 2007 2:24 pm
- Location: Nashville
- Contact:
If you want cheap microphone cables I would use Front End Audio, they actually took the time to test out cheap cables to see which were the best:
http://www.frontendaudio.com/HotWires_2 ... p/1000.htm
http://www.frontendaudio.com/HotWires_2 ... p/1000.htm
I bought a whole bunch of pulsar cables- at least half of them were bad- their soldering is very questionable and the ends are hard to re-solder. I would stay away. I bought a ton of cables form someone on ebay (5150 enterprises is his name) and they have lasted really well- out of 20 that I bought only 1 has gone bad in 3 years, and it just needed a resoldering. His shipping is calculated very strangely, but I think when all was said and done I paid about $5 per cable for 25 foot, ends are user serviceable.Sean Shannon wrote:I used the cables from here:
http://www.pulsartech.net
Very inexpensive, and work fine.
Who is online
Users browsing this forum: No registered users and 66 guests