FS: Otari MX5050 2 track 1/4" with extras
Posted: Thu Dec 13, 2007 8:12 am
i posted this on reno's craigslist, but i thought i would offer it up here for those in northern california or northern nevada. (too expensive to ship two machines and the stand and the tape).
I have an Otari MX5050 B3 1/4" tape machine. I used it as a 2 track mixdown deck but havent used it much since the last project.
the heads show some wear (i can take a picture if you are interested). the pots are a bit scratchy, but the unit is very functional.
it also comes with all of these extras:
-A heavy duty roll around stand as shown in the picture
-A blue take up reel as shown in the picture
-a spare parts machine complete with motors, tape heads (full track), vu meters, one hub, transport, almost everything needed
-approx 6 new reels of quantegy 1/4 tape including the reels (about 3 are the smaller 7" reels the others are the larger reels)
I am asking $300 for all of this. i dont have a demag or alignment/calibration tape for it.
email me with questions at: pickleinn (AT) gmail (DOT) com
I have an Otari MX5050 B3 1/4" tape machine. I used it as a 2 track mixdown deck but havent used it much since the last project.
the heads show some wear (i can take a picture if you are interested). the pots are a bit scratchy, but the unit is very functional.
it also comes with all of these extras:
-A heavy duty roll around stand as shown in the picture
-A blue take up reel as shown in the picture
-a spare parts machine complete with motors, tape heads (full track), vu meters, one hub, transport, almost everything needed
-approx 6 new reels of quantegy 1/4 tape including the reels (about 3 are the smaller 7" reels the others are the larger reels)
I am asking $300 for all of this. i dont have a demag or alignment/calibration tape for it.
email me with questions at: pickleinn (AT) gmail (DOT) com
