PLEASE - Need EV666 Mic Connector

Derrick · Post by **Derrick** » Sat Oct 24, 2009 12:35 am

Can anyone please please please help me out with a cannon conector (or whatever the connector is called) for my EV666 micropnone? I really want to use my mic but I cannot find the connector anywhere. Someone MUST have one they can sell me?!?!

Thanks

winky dinglehoffer · Post by **winky dinglehoffer** » Sat Oct 24, 2009 7:46 am

Is this what you're looking for?
http://www.alliedelec.com/search/produc ... KU=7194019

That's what's used on a lot of old ev's, but I've never had a 666, so I can't say for sure. They're easy enough to build, but if you're not up for that I might have an extra one that I built myself. If you're interested, pm me.

Tom

(EDIT: I just noticed the price on those--they used to be 8 bucks or so! I could sell you a short adapter cable for less than the price of the connector.)

Derrick · Post by **Derrick** » Sat Oct 24, 2009 9:43 am

Sorry Tom, but that's not it (thank you for the offer though!). It looks like a standard XLR, but with a somewhat flattened side like this one:

Notice the "D" shape to it sitting next to the "round" shape of the black XLR. You can also see the "D" shape in the bottom of the mic itself.

Here is just the plug:

winky dinglehoffer · Post by **winky dinglehoffer** » Sat Oct 24, 2009 11:12 am

I may have one of those in a box of parts somewhere. I'll take a look.

EDIT: I have two male connectors, but no female. Sorry.

hyde maintenance · Post by **hyde maintenance** » Sat Oct 24, 2009 11:52 am

Some of the older XLR ends (cannon I believe) have a rubber insert around the pins which squishes just enough to be used with a 666.
This is what I use and, while less than ideal, it gets the job done.

(Having said that...if there are two of them kicking around out there I wouldn't mind getting the right end myself)

emrr · Post by **emrr** » Mon Oct 26, 2009 5:16 pm

Cannon D connector. Keep looking, they are out there.

Derrick · Post by **Derrick** » Mon Oct 26, 2009 9:44 pm

emrr, I was told that once a while ago but I am still searching.

Someone out there must have one?!?!

Northamusi · Post by **Northamusi** » Tue Oct 27, 2009 3:32 pm

I have been looking for one of these for a while. If anyone comes up with a source, I'd love t hear about it.

Thanks,
Steve

RodC · Post by **RodC** » Tue Oct 27, 2009 6:51 pm

Any chance of taking a dremel to a standard XLR?

Message Board

PLEASE - Need EV666 Mic Connector

PLEASE - Need EV666 Mic Connector

Re: 666 Connector

Who is online