SOLD - 2 JoeMeek VC3Q's - $130 each
Posted: Wed Dec 30, 2009 2:00 pm
Both units have been sold.
Two JoeMeek VC3Q Channel strips in good condition. Smoke free studio use only, everything works perfectly. Some small scuffs and scratches on top plate, but face plates are perfect.
These units are not made anymore. Go search TapeOp about these units - they are very highly regarded. Includes upgraded power supplies. Each unit is $130.
Cash pickup in San Mateo, CA (San Francisco Bay Area), or buyers pay shipping/paypal.
Thanks for looking!
VC3Q Specification:
Mic: 1.2kohm; Line: 20kohm
Pre-amp overall gain: 0dB to 60dB
Common mode rejection: 70dB
Equivalent input noise: -128.5dBu (unweighted)
Distortion: 0.001% (below Compressor threshold)
Frequency response: 10Hz to 70kHz (-3dB)
Maximum input before clipping: Mic: +19.5dBu; Line: +44.5dBu
Headroom before clipping: +19.5dBu
Compressor threshold: +∞dBu to -20dBu (variable)
Compressor ratio: 5:1 (typical)
Compressor attack time: 1 msec to 100 msec (adaptive)
Compressor release time: 0.1 sec to 3 sec (adaptive)
EQ Boost and Cut: +/-15dB (zero phase-shift bell response)
LF Frequency: 80Hz (fixed)
MID Frequency: 300Hz to 5kHz variable
HF Frequency: 12kHz (fixed)
EQ ?Q?: 0.9 (1.6 octaves)
Output Gain: -∞dBu to +16dBu (variable)
Nominal output levels: +4dBu/-10dBv (selectable)
Output impedance: 75ohm
Output Level switch: 12dB attenuation
Noise Floor: -85dBu (typical, with ~40dB mic gain)
VU Meter: 8 segment bargraph
Power supply: 12V ac mains adaptor
Power consumption: 12W
Mechanical: 220W x 44H x 180D (overall)
Two JoeMeek VC3Q Channel strips in good condition. Smoke free studio use only, everything works perfectly. Some small scuffs and scratches on top plate, but face plates are perfect.
These units are not made anymore. Go search TapeOp about these units - they are very highly regarded. Includes upgraded power supplies. Each unit is $130.
Cash pickup in San Mateo, CA (San Francisco Bay Area), or buyers pay shipping/paypal.
Thanks for looking!
VC3Q Specification:
Mic: 1.2kohm; Line: 20kohm
Pre-amp overall gain: 0dB to 60dB
Common mode rejection: 70dB
Equivalent input noise: -128.5dBu (unweighted)
Distortion: 0.001% (below Compressor threshold)
Frequency response: 10Hz to 70kHz (-3dB)
Maximum input before clipping: Mic: +19.5dBu; Line: +44.5dBu
Headroom before clipping: +19.5dBu
Compressor threshold: +∞dBu to -20dBu (variable)
Compressor ratio: 5:1 (typical)
Compressor attack time: 1 msec to 100 msec (adaptive)
Compressor release time: 0.1 sec to 3 sec (adaptive)
EQ Boost and Cut: +/-15dB (zero phase-shift bell response)
LF Frequency: 80Hz (fixed)
MID Frequency: 300Hz to 5kHz variable
HF Frequency: 12kHz (fixed)
EQ ?Q?: 0.9 (1.6 octaves)
Output Gain: -∞dBu to +16dBu (variable)
Nominal output levels: +4dBu/-10dBv (selectable)
Output impedance: 75ohm
Output Level switch: 12dB attenuation
Noise Floor: -85dBu (typical, with ~40dB mic gain)
VU Meter: 8 segment bargraph
Power supply: 12V ac mains adaptor
Power consumption: 12W
Mechanical: 220W x 44H x 180D (overall)