FS: Beautiful Dual 1176 clone
Moderators: TapeOpLarry, tomb
-
- audio school
- Posts: 8
- Joined: Mon Sep 28, 2009 1:09 pm
FS: Beautiful Dual 1176 clone
Hello everyone,
I have to unload my dual 1176 clone. Lots of time and care went into the build. And sounds like it to
-XLR I/O
-OEP output transformer
-Wima poly caps
-Panasonic electrolytic caps
-NPO C0G type ceramic caps
-1% metal film resistors
-Alpha pots
-Precision trim pots for calibration
-Sifam meters
-Switchable stereo/dual mono
-"All Buttons Mode" on both channels.
The only defect is a few small scratches on the top of the case. Thats the only defects i can see. Sorry, there's a little dust in the pics...
Here's some pics:
I can get some more pics if you'd like. Also, i'll make some sound samples if you want.
I know i don't have alot of posts here, but thats cuz i spend most my time over at Studio-Central where i'm a TC with over a thousand posts. I also hang out at Prodigy-Pro and various other forums too. So, i am a real person selling a real compressor haha!
Price is $1500 usd + ship and fees. I'd like to keep it in the states. Lemme know if you have any questions or anything!
Brian
I have to unload my dual 1176 clone. Lots of time and care went into the build. And sounds like it to
-XLR I/O
-OEP output transformer
-Wima poly caps
-Panasonic electrolytic caps
-NPO C0G type ceramic caps
-1% metal film resistors
-Alpha pots
-Precision trim pots for calibration
-Sifam meters
-Switchable stereo/dual mono
-"All Buttons Mode" on both channels.
The only defect is a few small scratches on the top of the case. Thats the only defects i can see. Sorry, there's a little dust in the pics...
Here's some pics:
I can get some more pics if you'd like. Also, i'll make some sound samples if you want.
I know i don't have alot of posts here, but thats cuz i spend most my time over at Studio-Central where i'm a TC with over a thousand posts. I also hang out at Prodigy-Pro and various other forums too. So, i am a real person selling a real compressor haha!
Price is $1500 usd + ship and fees. I'd like to keep it in the states. Lemme know if you have any questions or anything!
Brian
- vikingrecording
- gettin' sounds
- Posts: 136
- Joined: Sat Oct 11, 2008 5:51 pm
- Location: Richmond, VA
- Contact:
-
- audio school
- Posts: 8
- Joined: Mon Sep 28, 2009 1:09 pm
-
- gimme a little kick & snare
- Posts: 91
- Joined: Wed Nov 22, 2006 8:58 am
- Location: NorCal
- Contact:
Who is online
Users browsing this forum: No registered users and 68 guests