FS rare vintage mixing desks EMT + SIEMENS

*Gear*ed towards individuals who are buying/selling - NOT a place for businesses to post their goods for sale.

Moderators: TapeOpLarry, tomb

Post Reply
livingstone
audio school
Posts: 8
Joined: Sun Jan 31, 2010 12:13 pm

FS rare vintage mixing desks EMT + SIEMENS

Post by livingstone » Fri Jul 23, 2010 5:08 am

I'm raising funds for an other project so i decided to part with those two beautyes i kept to set up a production orientated studio,
but as i won't have the space i thought, they'd be in use more than stocked waiting for an hypothetic future here.

so here they're !!!

there's a 24ch EMT MM40 and a lovely 8/2 Siemens Sitral M444

the EMT is composed of two frames linked, but that could be separated and run together with a multicore link (wich is now inside the desk).

the frame is loaded with
24x 411.7 mono mic/line modules
4x 416 group modules
4x 112 master modules
Aux master + monitor ...
stand, wooden sides and armrest
psu

+ 2 stereo input modules
+ 1 spare master module
+ 1 rack with 8 master send that could be used as an 8 bus out but that'd need a bit of work
+ all siemens 30 pin connectors needed to connect the desk

the Siemens Sitral is a standart M444 fully loaded and in beautifull shape,

the desk features:
6 mic line inputs with eqs + 2 line ins, 2 aux send pre post fader, direct out pre / post fader, passive faders, 2 bus,
those where the first siemens transistor console after the Vserie based on the V72 / V76 etc ...

it is loaded with:

6 V276a mic preamp
6 W295b equalizer
2 V275 summing amps
2 V294 output amps
2 V272 aux master outs
1 V282c 6 buffer amps for 6 direct outs pre / post fader
1 H280 oscillator
1 Vu meter
10 danner passive fader
........

if i'd part it over ebay i could get about 4k just for the modules, i don't count all xformers and rare tuchels inside the desk

i'll purvey it with
1 spare V282c
2 V274 distribution amps
all modules schematics
+ m444 leaflet with block diagram ...

i planned to restaure it but i haven't got the time to,

it need recap, calibration, a bit of switch cleaning (i've made the most part of it)
3 eqs have the mid band that doesn't work as it should because of bad caps, it is no big deal.
purveyed with siemens connectors too


i'm taking offers, eventually trades (mastering devices, studer 962 with 4 buss, wich i could move around...)
i'm not in a hurry,
those desk are quite unique sounding and rare


BOTH DESKS ARE NOW SOLD !!!
Last edited by livingstone on Fri Jun 10, 2011 8:29 am, edited 1 time in total.
____________no time______no sound____________________________


www.ansgtrom-mastering.com

User avatar
allbaldo
pushin' record
Posts: 282
Joined: Sat Jul 12, 2003 8:21 pm
Location: Tulsa, OK.
Contact:

Post by allbaldo » Fri Jul 23, 2010 6:47 pm

Well, those are gorgeous. Very nice.

livingstone
audio school
Posts: 8
Joined: Sun Jan 31, 2010 12:13 pm

Post by livingstone » Fri Jul 23, 2010 10:42 pm

thanks :D

b tw the boards aare located in belgium/brussels,
but i can crate them and ship it everywhere to the buyer expenses
____________no time______no sound____________________________


www.ansgtrom-mastering.com

User avatar
ott0bot
dead but not forgotten
Posts: 2023
Joined: Thu Jan 15, 2009 4:54 pm
Location: Downtown Phoenix

Post by ott0bot » Fri Aug 06, 2010 10:48 am

Dang....I'd love to pick up that little Siemens console.....but you need money for that.

livingstone
audio school
Posts: 8
Joined: Sun Jan 31, 2010 12:13 pm

Post by livingstone » Fri Aug 06, 2010 12:12 pm

of course ! :wink:
____________no time______no sound____________________________


www.ansgtrom-mastering.com

Post Reply

Who is online

Users browsing this forum: No registered users and 144 guests