Auditronics console FS/FT lower price! will ship anywhere!
Moderators: TapeOpLarry, tomb
Auditronics console FS/FT lower price! will ship anywhere!
I was planning on keeping this board but i have too many projects and the studio needs some other gear:
auditronics series 800 for sale or trade
2 dual input mic. preamps
10 stereo line preamps
no eq's on any of the channels, (master section has high and low eq)
vca's on all channels, (dbx 2150a for the mic. pre's and 2151 for the line-ins)
rackmount power supply but no cord
no patchbay or harness, (has open end wires attached to all channels, schematics with pin-out numbers are included)
tape transport module, (run, rec, stop, fwd, rwd)
mono monitor speaker
I would really like to sell or trade it locally for other gear, but I'm open to ideas....
will ship it anywhere as long as you paid for shipping..
PM if interested.
Thanks
<div><embed width="480" height="360" src="http://static.pbsrc.com/flash/rss_slideshow.swf" flashvars="rssFeed=http%3A%2F%2Ffeed1227.photobucket.com%2Falbums%2Fee436%2Ftwr2010%2Fauditronics_series_800%2Ffeed.rss" type="application/x-shockwave-flash" wmode="transparent"><a><img></a><a><img></a></div>
auditronics series 800 for sale or trade
2 dual input mic. preamps
10 stereo line preamps
no eq's on any of the channels, (master section has high and low eq)
vca's on all channels, (dbx 2150a for the mic. pre's and 2151 for the line-ins)
rackmount power supply but no cord
no patchbay or harness, (has open end wires attached to all channels, schematics with pin-out numbers are included)
tape transport module, (run, rec, stop, fwd, rwd)
mono monitor speaker
I would really like to sell or trade it locally for other gear, but I'm open to ideas....
will ship it anywhere as long as you paid for shipping..
PM if interested.
Thanks
<div><embed width="480" height="360" src="http://static.pbsrc.com/flash/rss_slideshow.swf" flashvars="rssFeed=http%3A%2F%2Ffeed1227.photobucket.com%2Falbums%2Fee436%2Ftwr2010%2Fauditronics_series_800%2Ffeed.rss" type="application/x-shockwave-flash" wmode="transparent"><a><img></a><a><img></a></div>
Last edited by pampa on Mon Nov 07, 2011 12:42 pm, edited 21 times in total.
- Gregg Juke
- cryogenically thawing
- Posts: 3544
- Joined: Fri Jun 11, 2010 10:35 pm
- Location: Buffalo, NY, USA
- Contact:
- Gregg Juke
- cryogenically thawing
- Posts: 3544
- Joined: Fri Jun 11, 2010 10:35 pm
- Location: Buffalo, NY, USA
- Contact:
- Gregg Juke
- cryogenically thawing
- Posts: 3544
- Joined: Fri Jun 11, 2010 10:35 pm
- Location: Buffalo, NY, USA
- Contact:
If you want a "serious" offer, then it would help your cause to name an asking price. If it's too high, but someone wants your console, I bet they'll reply with a "serious" offer. If nobody replies, lower your asking price until they do. Just a suggestion.
By the way, I'll up my offer to $50 shipped. Without knowing more about your console, and absent an asking price, I think that's a "serious" offer.
By the way, I'll up my offer to $50 shipped. Without knowing more about your console, and absent an asking price, I think that's a "serious" offer.
I appreciate your input, I've tried to put a fair price with the help of the forums but nobody seems to know much about it.
when I mean a serious offer I mean something that's relatively to what a board like this will cost, somebody offering $25-50 for something that would cost a couple of hundred dollars just to ship is not a "serious offer", and giving the amount of knowledge that people have on TOMB it's almost offensive, have you looked at the pictures?, None of you guys would sell something like this for $37.50.
I can get $50 by selling 1 or 2 parts of this board but I'm waiting to take it apart because maybe somebody wants the whole thing or maybe I even decide to keep it and rack the modules and donate the rest to a local nonprofit.
Again: I'm open to offers both cash and trade, send me yours if you are truly interested in buying it and we can figure something out. and for all of you that "need" to see a price:$1000 OBO
Regards and thanks for your time.
when I mean a serious offer I mean something that's relatively to what a board like this will cost, somebody offering $25-50 for something that would cost a couple of hundred dollars just to ship is not a "serious offer", and giving the amount of knowledge that people have on TOMB it's almost offensive, have you looked at the pictures?, None of you guys would sell something like this for $37.50.
I can get $50 by selling 1 or 2 parts of this board but I'm waiting to take it apart because maybe somebody wants the whole thing or maybe I even decide to keep it and rack the modules and donate the rest to a local nonprofit.
Again: I'm open to offers both cash and trade, send me yours if you are truly interested in buying it and we can figure something out. and for all of you that "need" to see a price:$1000 OBO
Regards and thanks for your time.
Last edited by pampa on Fri Mar 04, 2011 2:14 am, edited 2 times in total.
- Nick Sevilla
- on a wing and a prayer
- Posts: 5579
- Joined: Mon Mar 03, 2008 1:34 pm
- Location: Lake Arrowhead California USA
- Contact:
- Gregg Juke
- cryogenically thawing
- Posts: 3544
- Joined: Fri Jun 11, 2010 10:35 pm
- Location: Buffalo, NY, USA
- Contact:
Sorry pampa, just messing with you (in a fun-loving, jocular vein; no offense intended).
I wish I had something of equal (or equally innocuous ) value to trade, but no-go right now... Same with cash flow. I've heard positive (and negative) things about Auditronics. I have an old single-rack space parametric that is supposedly a channel-strip eq from a particular model of their boards. That's all I know, and I just gave it up for free...
I hope you sell it. Or, part it out and maybe make it more affordable for somebody here to make an actual offer. I think some of the frustration in the responding posts is sympathetic with you (you know, when your wife is having contractions and your stomach starts to hurt?), because you've been trying to move it for so long, but this is a tough economy. People usually need to see a price (or at least a range), just to know if it's even feasible within this particular space-time continuum for them to consider a purchase.
GJ
I wish I had something of equal (or equally innocuous ) value to trade, but no-go right now... Same with cash flow. I've heard positive (and negative) things about Auditronics. I have an old single-rack space parametric that is supposedly a channel-strip eq from a particular model of their boards. That's all I know, and I just gave it up for free...
I hope you sell it. Or, part it out and maybe make it more affordable for somebody here to make an actual offer. I think some of the frustration in the responding posts is sympathetic with you (you know, when your wife is having contractions and your stomach starts to hurt?), because you've been trying to move it for so long, but this is a tough economy. People usually need to see a price (or at least a range), just to know if it's even feasible within this particular space-time continuum for them to consider a purchase.
GJ
Who is online
Users browsing this forum: No registered users and 16 guests