Backroom Clear Out

Dan-O · Post by **Dan-O** » Mon Aug 13, 2012 8:34 am

All items from the backroom here at the studio not being used, and not going to be put into use.

Duplicator Tower (9) Drives - $300

Shrink Wrapper System with Hot Air Drier - $100

Mackie HR824 pair first generation (pristine) - $650

Yamaha O1V with ADAT card - $400

Quad Eight Westrex 248 8x4 Channel Console (32057-11 revB preamps) - $4000

Harrison Pro790 16x4x2 with custom rack - $700 (channels available individually $40ea)

Benchmark DAC-1 Black Rack mount, 96K, New volume Pot - $750

Sony DPS V55 Effects Processor w/manuals - $400

Altec 9800A mounting panel - $150

Altec 9550A power supply -$45

Altec 9476A power supply -$45

Altec 7361A mounting panel - $100

DBX 242 (x2) - $200 / $150 w/o PSU

I also have some TNC Microphones
ACM - 2 (5)
ACM - 3 (5)
ACM - 900 (2)

Prices do not include shipping. Large items like the consoles will need to have shipping arraigned if not a pickup.

Electro-Voice 664 · Post by **Electro-Voice 664** » Mon Aug 13, 2012 10:15 am

PM sent re: Quad Eight Westrex 248

Gregg Juke · Post by **Gregg Juke** » Mon Aug 13, 2012 1:22 pm

You didn't list any prices for the TNC/ACM mikes...

GJ

Nick Sevilla · Post by **Nick Sevilla** » Mon Aug 13, 2012 1:45 pm

how much for one ACM-3?

ultravioletray · Post by **ultravioletray** » Tue Aug 14, 2012 5:18 am

Greetings,

Curious about the Harrison console; is it in working condition?

Rock.

dAve

Dan-O · Post by **Dan-O** » Thu Aug 16, 2012 7:48 am

Hi Sorry for the delay. The Harrison is in working condition. The modules are out as they were going to be sold individually if no one wanted the board. I have them all still. 16x4x2, Custom stand, PSU, great condition.

[/img]

Dan-O · Post by **Dan-O** » Thu Aug 16, 2012 7:55 am

Here's Quad Eight as well.
It was custom built for Commonwealth Films, a processing/post house here in Richmond, in the late 80's. It's was decommissioned in early 2000's when I got it. It was fully functional. It was decommissioned poorly as they cut and misplaced most all of the cabling to the Elco's. I have one cable. I've never had the time to figure out the pins and it sat. It's missing, and always has, one knob off Channel one eq tone stack. The High end level control. It's also has a broken fader cap on channel one. There are other fader caps missing as well. Not a big deal at all in that regard. The pres are transformer on the input and are dual channel pres. The eq is the one you want. I have extensive documentation for it, the manual and of course the power supplies. It's a modular design and the frame has plenty of space.

Dan-O · Post by **Dan-O** » Thu Aug 16, 2012 7:58 am

ACM - 2 (5 left) - $100ea
ACM - 3 (3 left) - $100ea
ACM - 900 (2 left) - $250ea

Dan-O · Post by **Dan-O** » Thu Aug 16, 2012 8:03 am

I'm also open to good reasonable offers on:

Duplicator Tower (9) Drives - $300

Shrink Wrapper System with Hot Air Drier - $100

Mackie HR824 pair first generation (pristine) - $650

Yamaha O1V with ADAT card - $400

Quad Eight Westrex 248 8x4 Channel Console (32057-11 revB preamps) - $4000

Harrison Pro790 16x4x2 with custom rack - $700 (channels available individually $40ea)

Benchmark DAC-1 Black Rack mount, 96K, New volume Pot - $750

Sony DPS V55 Effects Processor w/manuals - $400

....so please inquire.

Dan-O · Post by **Dan-O** » Thu Aug 16, 2012 2:52 pm

The Mackies, Couple blemishes, other wise perfect.

PlasticSoul · Post by **PlasticSoul** » Tue Sep 03, 2013 10:23 pm

I'm interested in the altec 9800a and 9550a if they are still available? I'll send a pm.

Message Board

Backroom Clear Out

Backroom Clear Out

Re: Backroom Clear Out

Who is online