Price 150?
Postage Europe and US. 70?
Location is Ireland.
Contact me petermontg(at)gmail.com for photos and more info if needed
Mechanical VU meters have been the industry standard for years. And in loudness measuring applications they are hard to beat. The trouble is that many of the meters installed in today's recorders and related products are either too small to read easily or too inaccurate to be of much use.
The Logitek 4VUB solves this problem by supplying four large, accurate, "A" scale mechanical VU response meters centered in a 2RU self powered enclosure. Each meter has a balanced, bridging, high impedance input and a rear panel zero adjustment control.
A phase button for each pair of meters places left plus right on the left meter and left minus right on the right meter. Comparing these two readings gives a quick check for correct phasing. Meter lights and an integral label strip add to the usefulness of this handy unit.
The 4VUB VU meter is easy to install, easy to use and highly reliable.
Features
Four large, accurate, "A" scale mechanical VU response meters
2RU self powered box
Balanced, bridging, high impedance input
Rear panel zero adjustment control
Phase button for each pair of meters
Meter lights
Integral label strip
Easy to install
Easy to use
Highly reliable
Specifications
Inputs: Balanced Bridging
Input Level: +20 dBu maximum
Input Impedance: 50 kOhm
Frequency Response: +/- .2 dB, 20 Hz - 20 kHz
Sensitivity: -14 to +10 dBu for 0 VU reading
Sensitivity Adjustments: Screwdriver adjustment on the rear panel
Metering: 2 1/2 inch VU responsxe meters, lighted
Connectors: Female XLR, pin 1 ground
Power Requirements: 110/220 VAC 50/60 Hz switchable, 6 Watts
Dimensions: 19" Wide x 3.48" height (2RU) x 6" Deep
Phase Display: Pushbutton changes meter display from Left and Right
to Left + Right and Left - Right
FS. Logitek 4VU Rackmount Meter Bridge.
Moderators: TapeOpLarry, tomb
-
- audio school graduate
- Posts: 14
- Joined: Sat Jan 26, 2013 2:49 pm
- Location: Ireland
- Contact:
Who is online
Users browsing this forum: No registered users and 37 guests