This 10x2 Studer 169 is in excellent condition and was completely restored about five years ago. All capacitors were replaced with Panasonic FC caps, so it sounds great and is ready for years of service.
If you haven't used one of these before, I found this YT video of someone demoing the EQ: https://www.youtube.com/watch?v=aA0VSOJEkeg
The uses for this mixer are many. With 10 excellent mic pres, it makes a great front end for any recording set up, mobile or otherwise. It also makes a great mixer to interface with a DAW and bring some analog flavor to the table.
The only minor issue to speak of is that one of the VU meters is not working. I would expect this would be an easy fix for a tech. The front panel on the bottom is also missing, and there are replacement ones available on eBay if it is deemed necessary to have. A few of the plastic caps for the knobs are also missing, and I know a source for these, too, if interested.
Included are the original power supply unit and an extra master channel unit.
SOLD
SOLD: Studer 169 10x2 mixer, completely recapped
Moderators: TapeOpLarry, tomb
-
- pluggin' in mics
- Posts: 38
- Joined: Wed Oct 10, 2012 8:26 am
- Location: Lawrence, MA
- Contact:
SOLD: Studer 169 10x2 mixer, completely recapped
Last edited by neonaudio on Tue Feb 09, 2016 9:41 am, edited 3 times in total.
Who is online
Users browsing this forum: No registered users and 73 guests