Yamaha M1516 For Sale $1500

*Gear*ed towards individuals who are buying/selling - NOT a place for businesses to post their goods for sale.

Moderators: TapeOpLarry, tomb

Post Reply
User avatar
playonbrother
takin' a dinner break
Posts: 189
Joined: Thu Sep 02, 2004 6:26 pm
Location: S. Deerfield, MA
Contact:

Yamaha M1516 For Sale $1500

Post by playonbrother » Thu Jan 14, 2016 5:47 pm

I'm changing things up for 2016 so I'm going to let go of my beloved Yamaha M1516 mixing console. If you are reading this, chances are you know what these things are all about!! But if you don't, here is a quick rundown....


16 input channels (discrete preamps, 4 band EQ, Tamura input transformers)
4 aux sends/returns (discrete output amp w/Tamura output transformers)
4 output busses (discrete output amp w/Tamura output transformers)
4 matrix outputs (discrete output amp w/Tamura output transformers)


All in all, lots of iron.... lots of vibe!!


I purchased it a few years back from a sound company in the DC area. They bought up another sound company that was closing and the m1516 was part of the deal. It looked like it had never been used and smelled like it when I opened up the case. With that said, I don't know the exact history of the console but it is in great condition.


The only issue with my 1516 is that three of the vu bulbs are blown. Other than that, this console is as clean as they get!! There isn't a scratchy pot or fader in this console. The preamps are great, especially on bass and drums but I use the entire console for tracking and mixing with no outboard preamps. ?It especially sounds good when you run it into the red. ?Those input and output transformers are great. The natural compression is beautiful. ?I have both the user manual and service manual in PDF format which I can pass along.
Thanks for looking!!

Image

Image

Image

Image

Image

User avatar
playonbrother
takin' a dinner break
Posts: 189
Joined: Thu Sep 02, 2004 6:26 pm
Location: S. Deerfield, MA
Contact:

Post by playonbrother » Thu Jan 21, 2016 12:47 pm

SOLD

Flyingeyepro
gettin' sounds
Posts: 107
Joined: Wed Jun 23, 2004 5:41 am
Location: Statesville, NC
Contact:

Post by Flyingeyepro » Sat Jan 23, 2016 11:33 am

These are great consoles to mod. Check this out.

https://flyingeyepro.wordpress.com/2015 ... aha-m1516/
--
Thanx
Chris Mitchell
FoH Engineer
Umphrey's McGee

www.youtube.com/user/umvideo
https://flyingeyepro.wordpress.com/
"e's jus dis guy, ya know?"

Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests