The Sherlock is still in the same state as when I bought it new from Drew so many years back. Anyone want to put it together?
The SSL compressor project is near-complete. It's been a very long time since I've even looked at it, but if anyone is interested, I'll let you know exactly where the project is at and will take pictures to send.
Price on either of them? Offers? Will take most anything on trade also.[/img]
Drewtronics Sherlock and SSL Compressor Projects FS
Moderators: TapeOpLarry, tomb
-
Recording Engineer
- steve albini likes it
- Posts: 345
- Joined: Mon May 12, 2003 3:09 am
- Location: Sacramento, CA
- Contact:
-
Recording Engineer
- steve albini likes it
- Posts: 345
- Joined: Mon May 12, 2003 3:09 am
- Location: Sacramento, CA
- Contact:
I just looked and the SSL compressor kit is probably 95% complete and other than the solder and maybe a couple mounting screws, everything should be there to complete it. The meter, pots/switches and connector holes are drilled and labeled. The PCBs are populated, the meter and connectors are mounted... Just need to mount the pots/switches, power transformer, and pcb and then solder it together with the included wire. Can send a picture or two if you'd like.
Who is online
Users browsing this forum: No registered users and 27 guests